Harbor Freight Tools 67696, 68149 operating instructions Grounding

Page 5

birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.)

20.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Save these instructions.

Grounding

To prevent electric shock

and death from incorrect grounding wire connection:

Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

Do not modify the power cord plug provided with the compressor. Never remove the grounding prong from the plug. Do not use the compressor if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

110-120 V~ Grounded Compressors:

Compressors with

Three Prong Plugs

1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This compressor is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

3.Improper connection of the equipment- grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

4.Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded.

5.Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the compressor’s plug.

6.Repair or replace damaged or worn cord immediately.

SKU 67696

For technical questions, please call 1-800-444-3353.

Page 5

68149

 

 

Image 5
Contents AIR Compressor For technical questions or replacement parts, please callSave This Manual General Safety WarningsService Air Compressor Safety WarningsPersonal safety 25’ 50’ 100’ 150’ LengthGrounding 125 V~ 3-Prong Plug and Outlet SymbologyCompressor Area Set Up SpecificationsUnpacking Instructions for putting Into useGeneral Operating Instructions Set UpOFF Cleaning, Maintenance, Lubrication Maintenance ServicingEmergency Depressurization Automatic Shut off SystemService technician Maintenance ScheduleMust be replaced only by a qualified DailyTroubleshooting Problem Possible Causes Likely Solutions Please Read the Following Carefully Problem Possible Causes Likely SolutionsPart Description Qty Compressor Parts ListCompressor Assembly Diagram Motor & Pump Parts List Motor & Pump Assembly Diagram Limited 1 year / 90 day Warranty