Harbor Freight Tools 40132 Specifications, Save this Manual, Safety Warning & Cautions

Page 2

SPECIFICATIONS

Motor

1 HP, Reversible, Two Pole

Volts

115V/230V

 

Amps

120V -

Start up = 9.20 Amps

 

 

No Load = 6.50 Amps

 

 

Full Load = 10.6 Amps

 

230V -

Start up = 2.25 Amps

 

 

No Load = 1.65 Amps

 

 

Full Load = 5.30 Amps

Frequency

60Hz

 

Shaft Diameter

5/8”

 

RPM No Load

3450 RPM @ 115 VAC or 3413 RPM @ 230 VAC

Phase

Single

 

Mounting Base Dimensions

6-1/4”Lx3-5/16”W

 

(4-slotted holes 1-1/4”Lx3/8”W)

Net Weight

23 Lbs.

 

 

 

 

SAVE THIS MANUAL

You will need the manual for the safety warnings and cautions, assembly instructions, operat- ing procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe, dry place for future reference.

SAFETY WARNING & CAUTIONS

WARNING: When using electric tools, machines, or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!

1.KEEP WORK AREA CLEAN. Cluttered areas invite injuries.

2.OBSERVE WORK AREA CONDITIONS. Do not use machines or power tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electri- cally powered tools in the presence of flammable gases or liquids.

3.KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s capacities.

6.USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended.

#40132

Page 2

Image 2
Contents Compressor Duty Motor 1 HP Model Save this Manual SpecificationsSafety Warning & Cautions Page Unpacking Mounting the MotorWiring Please Read the Following Carefully