Harbor Freight Tools 93785 operating instructions Operation, Maintenance

Page 7
Oil Filler Cap (44)
Air Filter (4)

Note: A qualified electrician must wire in a pressure switch control that turns off the motor when the pump reaches the desired pressure (less than 140 PSI).

Note: Always install this Air Compressor Pump to an air tank that has a pressure release valve set at less than 140 PSI.

Note: A high/low cut-in/cut-out switch (not included) can be incorporated to operate a motor starter or motor contractor for semi-automatic control of air pressure in the vessel.

Warning: Avoid serious injuries. Do not operate this Air Compressor Pump without the Safety Guard in place.

13.Unscrew the Oil Filler Cap (44) and fill the oil reservoir to mid point as seen in the Oil Window (22). The oil should be premium qualify, 30- weight, non-detergent oil. Do not overfill.

Operation

1. Turn on the power switch to the drive motor.

2. Check the following items: - V-belt should not vibrate. - Listen for air leaks.

- Listen for abnormal noise or vibration.

Oil Window (22)

- If there is a problem, turn power off and

release air pressure from the line before attempting repairs.

3.Allow Air Compressor Pump to cool down after each hour of use.

4.Turn off the power switch to the drive motor when finished using the Air Compressor Pump. Do not leave on if the compressed air is not being used.

Maintenance

Caution: Remove power from the drive motor before attempting any maintenance on the Air Compressor Pump.

1.Before each use, verify that the oil level is at the proper level as viewed through the Oil Window (22).

2.Periodically check V-belts for proper tension.

3.Periodically remove Air Filter (4) and blow clean with compressed air. If it is dark in color and will not blow clean, replace the filter.

4.If the oil appears dirty, open the Oil Filler Cap (44), and remove the Oil Drain Bolt (24), capturing the oil in a suitable container. Dispose of the used oil in accordance with local regulations. Replace the Oil Drain Bolt, and refill as discussed in item 12 above.

SKU 93785 For technical questions please call 1-800-444-3353

Page 7

Image 7
Contents 93785 Safety Warnings and Precautions SpecificationsSKU 93785 For technical questions please call REV 02/07 Air Compressor Pump Safety Precautions Unpacking InstallationOperation MaintenanceParts List Please Read the Following Carefully Assembly Drawing

93785 specifications

Harbor Freight Tools 93785 is a powerful and versatile tool that has garnered attention among DIY enthusiasts and professional craftspeople alike. This 12-inch miter saw combines functionality with an affordable price, making it a top choice for those looking to complete precise cuts in a variety of materials.

One of the main features of the 93785 is its powerful 15-amp motor. This robust motor allows users to make cuts through dense materials with ease, ensuring efficiency and effectiveness in heavy-duty tasks. The saw boasts an impressive maximum RPM of 5,000, allowing for smooth and clean cuts, which is essential for achieving professional-grade results.

The dual bevel feature is another key selling point of this miter saw. With the ability to tilt left and right, users can easily make compound miter cuts without needing to reposition the workpiece. This feature significantly improves accuracy and saves time when working on intricate projects, such as crown molding or other detailed trim work.

The sliding capability of the 93785 allows for wider cuts, accommodating larger workpieces. This feature is crucial for users who often work with thick or wide materials, as it provides added versatility without sacrificing precision. The saw also comes equipped with a laser guide, which projects a line onto the workpiece, ensuring that users can see exactly where the cut will be made. This laser alignment leads to greater accuracy, resulting in cleaner and more precise cuts.

Safety is a priority with the Harbor Freight Tools 93785, which includes a safety switch to prevent accidental activation. The blade guard also adds an additional layer of protection, ensuring that users can operate the saw with confidence, knowing that their safety is being taken into account.

The ergonomic design of the saw features a comfortable handle that reduces fatigue during extended use. This thoughtful design makes it easier for users to maneuver the saw and maintain control while cutting.

In summary, the Harbor Freight Tools 93785 12-inch miter saw is a well-equipped tool that stands out due to its powerful motor, dual bevel capabilities, sliding features, and laser guide. Combined with a focus on safety and user comfort, it presents an excellent option for anyone looking to enhance their woodworking arsenal. Whether you are a seasoned professional or a weekend warrior, this miter saw offers a balance of quality, performance, and affordability that is hard to beat.