Harbor Freight Tools 66399 operating instructions Service

c.	Keep bystanders, children, and			b.	Do not use the tool if the switch
	visitors away while operating the				does not turn the tool on or off.
	tool. Distractions are able to result in				Any tool that cannot be controlled
	the loss of control of the tool.				with the switch is dangerous and
					must be repaired.
			Personal safety	c.	Disconnect the tool from the air
a. Stay alert. Watch what you are do-					source before making any adjust-
	ing and use common sense when				ments, changing accessories, or
	operating the tool. Do not use the				storing the tool. Turn the switch to
	tool while tired or under the influ-				its off position and disconnect from
	ence of drugs, alcohol, or medica-				the battery.
	tion. A moment of inattention while			d.	Store the tool when it is idle out of
	operating the tool increases the risk
					reach of children and other un-
	of injury to persons.
					trained persons. A tool is dangerous
b. Avoid unintentional starting. Be					in the hands of untrained users.
	sure the switch is off before con-			e.	Maintain the tool with care.
	necting to the air supply. Do not
	carry the tool with your finger on the			f.	Check for misalignment or bind-
	switch or connect the tool to the air				ing of moving parts, breakage of
	supply with the switch on.				parts, air leaks, frayed wires, and
c.	Do not overreach. Keep proper				any other condition that affects the
					tool’s operation. If damaged, have
	footing and balance at all times.
					the tool serviced before using. Many
	Proper footing and balance enables
					accidents are caused by poorly main-
	better control of the tool in unexpect-
					tained tools. There is a risk of burst-
	ed situations.
					ing if the tool is damaged.
d.			Always wear eye protec-	g.	Use only accessories that are
			tion. Wear ANSI-ap-		identified by the manufacturer for
			proved safety goggles.		the specific tool model. Use of an
e.			Always wear hearing		accessory not intended for use with
					the specific tool model, increases the
			protection when using
					risk of injury to persons.
			the tool. Prolonged expo-
			sure to high intensity noise
						Service
	is able to cause hearing loss.
				a.	Tool service must be performed
		Tool use and care			only by qualified repair personnel.
a.	Do not force the tool. Use the			b.	When servicing a tool, use only
	correct tool for the application. The				identical replacement parts. Use
	correct tool will do the job better and				only authorized parts.
	safer at the rate for which the tool is
	designed.
SKU 66399			For technical questions, please call 1-800-444-3353.				Page 3