Table Saw Safety Warnings

or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.

For Your Own Safety Read Instruction

Manual Before Operating Saw

1.Wear eye protection.

2.Use saw-blade guard and spreader for every operation for which it can be used, including all through sawing.

3.Keep hands out of the line of saw blade.

4.Use a push-stick when required.

5.Know how to reduce risk of kickback.

6.Do not perform any operation free- hand.

7.Never reach around or over saw blade.

8.Make sure the workpiece is support- ed at all times while sawing. Use a roller stand (not provided) with larger workpieces if necessary.

9.To properly understand all safety warnings, be familiar with the follow- ing safety terms and equipment:

a.Featherboard – A block with “fingers“ that hold the workpiece against the fence while sawing.

b. Through-sawing – A cut made from one side of a board to the opposite side, without stopping.

c.Ripcut or Ripping - A cut made paral- lel to (along with) the grain of the wood.

d.Crosscut or Crosscutting - A cut made perpendicular (at a 90° angle) to the grain of the wood.

e.Push-stick – A narrow strip of wood or other soft material with a notch cut into one end and which is used to push short pieces of material through saws. It provides a safe distance between the hands and the cutting tool. Must be narrower than the cut width to prevent contact with the blade.

f.Freehand – Feeding a workpiece through the saw without using a fence or guided support to guide it.

Not a safe method.

g.Kerf – The gap made by the saw in the workpiece.

h.Kickback – A sudden reaction to a pinched, bound, or misaligned blade, causing an uncontrolled workpiece to lift up and out of the saw toward the operator.

i.Spreader – A metal plate that fol- lows the saw blade to keep the kerf (gap) from closing on the saw blade. Spreaders, except riving knives, must be aligned to the blade after blade adjustment to prevent binding.

j.Riving Knife – A spreader mounted on the same mechanism as the blade. Generally more effective than simple spreaders.

10.As noted previously, Kickback is a sudden reaction to a pinched, bound, or misaligned blade, causing an un-

SKU 66630

For technical questions, please call 1-800-444-3353.

Page 4

66630 specifications

Harbor Freight Tools 66630 is a versatile six-gallon portable air compressor that caters to both novice DIY enthusiasts and seasoned professionals. Its compact and lightweight design makes it easy to transport, while still delivering robust performance for a wide range of applications.

One of the standout features of the 66630 is its powerful 1.5 horsepower motor, which is designed for maximum efficiency and durability. The motor operates at a low RPM, reducing wear and tear while ensuring quieter operation. With a maximum pressure of 125 PSI, this air compressor is capable of handling a variety of pneumatic tools such as nail guns, airbrushes, and impact wrenches, making it a valuable addition to any toolbox.

The 66630's six-gallon vertical tank design maximizes air storage without taking up excessive floor space. This feature is particularly advantageous for those who have limited workshop areas. The tank is made of high-quality steel, providing durability and resistance to rust and corrosion, which prolongs the compressor's life.

In terms of technologies, the Harbor Freight Tools 66630 utilizes an oil-free pump system. This means less maintenance is required, as users do not need to worry about oil changes or oil spills. The oil-free pump also contributes to cleaner air output, making it more suitable for tasks like painting or inflating sports equipment.

Safety is another priority with this compressor. It is equipped with a thermal overload protector that prevents the motor from overheating during prolonged use. The built-in pressure regulator allows users to adjust and control air pressure, ensuring compatibility with various tools and applications.

Additionally, the 66630's ergonomic handle and rubber feet enhance portability and stability. The handle provides a comfortable grip for easy transport, while the rubber feet reduce vibrations, ensuring the compressor remains stable during operation.

Overall, the Harbor Freight Tools 66630 air compressor stands out for its combination of power, portability, and user-friendly features. Its versatility makes it suitable for various tasks, from home repairs to professional projects, solidifying its place as a reliable tool in any workshop. Whether for inflating tires, powering tools, or completing a range of home improvement tasks, the 66630 provides the performance needed to get the job done efficiently.