SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
V ~ | Volts Alternating Current | |
A | Amperes | |
| ||
no xxxx/min. | No Load Revolutions | |
per Minute (RPM) | ||
|
Unpacking
When unpacking, check to make sure the parts listed on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Blade Mounting
Warning! Never attempt to mount a blade unless the Jigsaw is unplugged from the power source.
1.Loosen the Bolt on the Blade Clamp (#21) with the Hex Spanner (#32). Refer to Figure 1.
2.Insert the end (with holes) of the Blade between the Blade Stock and the Blade Clamp. Hold the Blade level while tightening the Bolt with the Hex Spanner (#32).
Note: To remove a Blade, loosen the Bolt and remove Blade.
Figure 1
Blade Clamp | Bolt |
Blade Stock
Blade
SKU 46055 | Page 8 |