Mounting the Dolphin HomeBase
If you want to mount the HomeBase to a vertical surface, be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is seated in the HomeBase.
Back Panel Dimensions
.15 in. |
(3.85 mm.) |
.32 in. |
8.06mm Diameter, |
2 places |
1.44 in. |
(36.7 mm.) |
.53 in. |
13.65mm, |
2 places |
3.99 in. |
(101.42 mm.) |
1.85 in. |
(46.87 mm.) |
4.35 in. |
(110.47 mm.) |
Mounting Guidelines
1.Before you begin, make sure you have two screws that are size
2.Drill two holes into the wall. The holes should be located approximately 1.44 in. (36.7 mm) apart.
3.Insert a screw into each hole, leaving 0.2 in. (5 mm) of its head exposed.
Dolphin® 7600 User’s Guide | Rev D | 8 - 5 |
| 10/18/2007 |
|