JVC KW-XC828 manual Troubleshooting, Symptoms Causes Remedies, Fm/Am, Disc

TROUBLESHOOTING

ENGLISH

40

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes			Remedies
	•	Sound is sometimes	Connections are not good.	Check the cords and
		interrupted.		connections.
	•	Sound cannot be heard	The volume control is turned	Adjust it to the optimum
General		from the speakers.	to the minimum level.	level.
			Connections are incorrect.	Check the cords and
				connections.
	•	This unit does not work at	The built-in microcomputer	Press the reset button on the
		all.	may function incorrectly due	front panel (see page 2.)
			to noise, etc.
	•	SSM automatic preset	Signals are too weak.	Store stations manually.
FM/AM
		does not work.
	•	Static noise while listening	The antenna is not	Connect the antenna firmly.
		to the radio.	connected firmly.
	•	Disc cannot be played	Disc is inserted upside	Insert the disc correctly.
		back.	down.
	•	Disc sound is sometimes	You are driving on rough	Stop disc play while driving
		interrupted.	roads.	on rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on the	No disc is in the loading slot	Insert disc.
Playback		display.	(or in the magazine.)
			Disc is inserted incorrectly.	Insert it correctly.
Disc	•	Disc can neither be played	The CD player may function	Press and hold both the
		back nor ejected.	incorrectly.		/ ATT and CD 0
				buttons at the same time
				for several seconds.
	•	“EJECT ERR” appears on	The disc was interrupted	Press CD 0, or press both
		the display.	ejection or insertion.	the		/ ATT and CD 0
				buttons together to clear
				the message.
	•	CD-R/CD-RW cannot be	CD-R/CD-RW is not	• Change a finalized CD-R/
		played back.	finalized.	CD-RW.
	•	Tracks cannot be skipped		• Finalize the CD-R/CD-RW
		on CD-R/CD-RW.		with the component which
				you used for recording.