After installation, set the built-in clock correctly.
OTHER MAIN FUNCTIONS
About the demonstration mode Setting the clock (DEMO MODE)
ENGLISH
When shipped from the factory, “DEMO” is set to “DEMO ON” in this unit. The demonstration will start automatically if no sound comes in for 3 minutes. (See page 31.)
To deactivate the demonstration mode
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 31.)
2 If “CLOCK HOUR” does not appear, press ¢ 
or 4 
repeatedly until it appears.
2 Press ¢
or 4
to select “DEMO.”
3 Adjust the hour.
3 Press – to select “DEMO OFF.”
4 Press ¢ 
or 4 
until “CLOCK
MIN (minute)” appears on the display.
4 Press SEL (Select) to finish the setting.
CONTINUED TO THE NEXT PAGE
29