Porter-Cable 4212 (29550) instruction manual Maintenance, Accessories

Page 25

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. Clean all plastic parts with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

WEAR ANSI Z87.1 SAFETY GLASSES WHILE USING COMPRESSED AIR.

SERVICE AND REPAIRS

All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE·DELTA FACTORY SERVICE CENTER. All repairs made by these agencies are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by anyone other than these agencies.

Should you have any questions about your tool, feel free to write us at any time. In any communications, please give all information shown on the nameplate of your tool (model number, type, serial number, etc.).

ACCESSORIES

A complete line of accessories is available from your Porter-Cable•Delta Supplier, Porter-Cable•Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Porter-Cable•Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Porter-Cable•Delta recommended accessories should be used with this product.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Française Español PáginaTable of Contents Important Safety Instructions Safety Guidelines DefinitionsReplacement Parts Additional Safety RulesBackground Information Dovetail and BOX Joint OverviewDovetail Dado Sliding Dovetail Through DovetailsJIG Overview Product CapabilitiesCarton Contents Additional Tools Required AssemblyMounting Instructions Clamps OperationTemplate Mounting Positioning the Wood Template SupportTearout Reduction HALF-PINS VS. HALF-TAILSAligning the Templates Router BIT Depth Template GuidesOptimal Board Widths Board ThicknessBoard Lengths Drawers Project LAY OUTItems Needed Items Needed for Miniature Cutting the TailsCutting the Pins Items Needed Cutting HALF-BLIND DovetailsCenter Fitting and TroubleshootingRabbeted HALF-BLIND Dovetails R10 Cutting the First Workpiece BOX JointsCutting the Second Workpiece Cutting the Dado Board Dovetail Dados Sliding DovetailsCutting the Tenon Board Accessories MaintenancePORTER-CABLE Limited ONE Year Warranty WarrantyArizona Georgia Minnesota Oregon Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents