Porter-Cable 4212 (29550) instruction manual Español Página, Française

Page 1

Note: Rockler may not carry all products and/or sizes listed in this vendor's publication

INSTRUCTION
INSTRUCTION	ESPAÑOL: PÁGINA 27
MANUAL	FRANÇAISE : PAGE 51
	DOVETAIL JIG

MODELS 4210 & 4212

(29550)

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2004 Porter-Cable Corporation

IMPORTANT

Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations.

The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference.

Model No. _____________________________________

Type __________________________________________

Serial No.______________________________________

RTD10000210AA Part No. A05065 - 05-27-05

Image 1

Contents Française Español PáginaTable of Contents Important Safety Instructions Safety Guidelines DefinitionsReplacement Parts Additional Safety RulesBackground Information Dovetail and BOX Joint OverviewDovetail Dado Sliding Dovetail Through DovetailsJIG Overview Product CapabilitiesCarton Contents Additional Tools Required AssemblyMounting Instructions Clamps OperationTemplate Mounting Positioning the Wood Template SupportTearout Reduction HALF-PINS VS. HALF-TAILSAligning the Templates Router BIT Depth Template GuidesOptimal Board Widths Board ThicknessBoard Lengths Drawers Project LAY OUTItems Needed Items Needed for Miniature Cutting the TailsCutting the Pins Items Needed Cutting HALF-BLIND DovetailsCenter Fitting and TroubleshootingRabbeted HALF-BLIND Dovetails R10 Cutting the First Workpiece BOX JointsCutting the Second Workpiece Cutting the Dado Board Dovetail Dados Sliding DovetailsCutting the Tenon Board Accessories MaintenancePORTER-CABLE Limited ONE Year Warranty WarrantyArizona Georgia Minnesota Oregon Canadian PORTER-CABLE Delta Service Centers