Porter-Cable D24938-044-2 instruction manual Hazard

Page 3

IMPORTANT SAFETY INSTRUCTIONS

Save these instructions

Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operation instructions before using this equipment.

HAZARD

WARNING: Risk of explosion or fire

What Could Happen

How To Prevent It

It is normal for electrical contacts

Always operate the compressor in a well

within the motor and pressure switch to

ventilated area free of combustible

spark.

materials, gasoline, or solvent vapors.

 

 

If electrical sparks from compressor

If spraying flammable materials, locate

come into contact with flammable

compressor at least 20 feet away from

vapors, they may ignite, causing fire or

spray area. An additional length of hose

explosion.

may be required.

 

Store flammable materials in a secure

 

location away from compressor.

 

 

Restricting any of the compressor

Never place objects against or on top

ventilation openings will cause serious

of compressor. Operate compressor in

overheating and could cause fire.

an open area at least 12 inches away

 

from any wall or obstruction that would

 

restrict the flow of fresh air to the

 

ventilation openings.

 

Operate compressor in a clean, dry well

 

ventilated area. Do not operate unit

 

indoors or in any confined area.

Unattended operation of this product

Always remain in attendance with the

could result in personal injury or

product when it is operating.

property damage. To reduce the risk of

Always disconnect electrical power by

fire, do not allow the compressor to

moving pressure switch lever to the off

operate unattended.

position and drain tank daily or after

 

each use.

 

 

3- ENG

D24938

Image 3
Contents Instruction Important Safety Instructions Safety Guidelines DefinitionsHazard Attachments & Accessories Electricity. Like any other electrically Result in serious burns Fire, Inhalation, Damage to Vehicle Surfaces Duty Cycle SpecificationsAccessories GlossaryUnpacking AssemblyTools Required for Assembly To Install HandleAssemble Rubber Feet To Assemble WheelsTo Add Oil To Pump Location of the Air Compressor InstallationExtension Cords Voltage and Circuit Protection120/240 Dual Voltage Motor Operation Know Your Air CompressorDescription of Operation Before Starting How to Use Your UnitBefore Each Start-Up How to StartCustomer Responsibilities MaintenanceChanging CheckingTo Replace Belt Air Filter Inspection and ReplacementMotor Pulley/Flywheel Alignment To Replace or Clean Check Valve Service and AdjustmentsTo Replace Regulator Storage Problem Cause Correction TroubleshootingWhile accessory is being Problem Cause Correction Problem Cause Correction Limited Warranty