ACCESSORIES
Accessories for this unit are available at the store the unit was purchased.
One accessory available for this unit is the Job Boss ™ Mobility Kit, this accessory includes retractable handle, comfort grip, mounting bracket, pneumatic wheels, shoulder bolts, and all associated hardware needed to make this unit more mobile.
Unit shown with PTA50 Mobility kit, sold separately.
ASSEMBLY
Unpacking
1.Remove unit from carton and discard all packaging.
INSTALLATION
HOW TO SET UP YOUR UNIT
Location of the Air Compressor
Locate the air compressor in a clean, dry and well ventilated area. The air compressor should be located at least 12" away from the wall or other obstructions that will interfere with the flow of air. The air compressor pump and shroud are designed to allow for proper cooling. The ventilation openings on the compressor are necessary to maintain proper operating temperature. Do not place rags or other containers on or near these openings.
GROUNDING INSTRUCTIONS
RISK OF ELECTRICAL SHOCK. In the event of a short circuit, grounding reduces the risk of shock by providing
an escape wire for the electric current. This air compressor must be properly grounded.
The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustrations). The plug must be used with an outlet that has been installed and grounded in accordance with all local codes and ordinances.
1.The cord set and plug with this unit contains a grounding pin. This plug MUST be used with a grounded outlet.
IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.
2.Make sure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER. See illustration.
3.Inspect the plug and cord before each use. Do not use if there are signs of damage.
Plug
Grounding Pin
Grounded 
Outlets
9- ENG | D28299 |