Porter-Cable 4112, 4113, 4114, 4115 instruction manual Inside

Page 8

Drawer Front

INSIDE

INSIDE

Left Side

of Drawer

Fig. 10

9.Fig. 11 shows both the left and right corner of a drawer fitted together after they were both routed from the left end of the templet. Note the location of partial pins on drawer sides.

10.If for appearance reasons the partial pins are desired to be in the same location of both sides of the drawer as shown in Fig. 12, then rout the right end of the drawer front and right side of the drawer on the right end of the templet. Adjust the edge guide the same as those on the left (mirror image).

	Partial Pin
Left Side		Right Side
of Drawer		of Drawer
(Pin Board)		(Pin Board)
	Front of Drawer	Partial Pin
	(Tail Board)	Partial Pin
	(Tail Board)

	Fig. 11

	Partial Pin
Left Side		Right Side
Left Side		of Drawer
of Drawer		(Pin Board)
(Pin Board)
	Front of Drawer
	(Tail Board)

	Fig. 12

8

Image 8

Contents Español Página FrançaiseSafety Guidelines Definitions Important Safety InstructionsAdditional Safety Rules Replacement PartsForeword CapacityAdjusting Edge Guide Location Assembly and AdjustmentAdjusting Templet Location Identifying Drawer Parts Clamping Drawer Parts HALF-BLIND DovetailsPreparing Router Routing Dovetails Inside Half-Blind Dovetails Clamping Drawer Parts and Routing Dovetails 1/4 HALF-BLIND Rabbeted DovetailsPreparing Drawer Front BOX Joints Clamping BOX PartsRouting BOX Joints Maintenance AccessoriesPORTER-CABLE Limited ONE Year Warranty Canadian PORTER-CABLE Delta Service Centers Arizona Illinois Minnesota