Powermatic 66 Operating Instructions for Table Saws, Tilting Mechanism Adjustment

Page 14

If the saw raising arm has been re-located, the table may have to be realigned so as to provide clearance between the saw blade and table insert slot. The splitter will also have to be realigned.

NOTE: The saw arm setscrew must be tight to avoid the possibility of movement which could cause the blade to hit the insert.

Tilting Mechanism Adjustment

If binding occurs in the tilting mechanism, clean off the saw dust and pitch accumulation and re- grease. If binding continues, check the alignment and readjust as required to center worm with the worm gear segment on the trunnion.

If there is excessive play, loosen bracket mounting screws (A, Figure 23) and turn adjustment screw (B, Figure 23) clockwise to raise pinion. A tight mesh without binding is ideal. Re-tighten mounting screws and check over the 90 degree to 45 degree range of tilt for excessive play or binding. Re-adjust if required.

Operating Instructions for Table Saws

Figure 23

1.Familiarize yourself with the location and operation of all controls and adjustments and the use of accessories such as the miter gauge and rip fence.

2.Serious injury can result from kickbacks which occur when a work piece binds on the saw blade or binds between the saw blade and rip fence or other fixed object. This binding can cause the work piece to lift up and be thrown toward the operator. Listed below are the conditions which can cause kickbacks:

•Confining the cutoff piece when crosscutting or ripping.

•Releasing the work piece before completing the operation or not pushing the work piece all the way past the saw blade.

•Not using the splitter when ripping or not maintaining alignment of the splitter with the saw blade.

•Using a dull saw blade.

•Not maintaining alignment of the rip fence so that it tends to angle toward instead of away from the saw blade front to back.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Inch Table Saw Part No. M-0460231NTWarranty and Service More Information WMH Tool Group WarrantyTable of Contents Page Page Introduction Specifications 8 at 90-degrees 2-1/8 at 45-degreesContents of the Shipping Container UnpackingMounting Extension Wings Installation and AssemblyTools required for assembly Use care when working with or around sharp saw blade Installing BladeSplitter and Guard Assembly Optional Wood Extension TableGrounding Instructions Motor CoverBlade Raising and Tilting AdjustmentsExtension Cords Miter Slot AlignmentBelt Tensioning Tilt Stop AdjustmentMiter Gauge Adjustment Splitter Alignment Insert AdjustmentBlade Raising Mechanism Adjustment Arbor and Arbor Bearing RemovalTilting Mechanism Adjustment Operating Instructions for Table SawsPage Rip Sawing Resawing CrosscuttingBevel and Miter Operations Do not use the standard table insert for dadoing operations Safety DevicesDado Cutting Feather Board FigurePush Block & Push Stick Figures 39 MaintenanceFiller Piece Figure Page Probable Cause Remedy TroubleshootingTrouble Optional Accessories Replacement PartsParts List Trunnion Assembly Index No. Part No Description Size Qty3530006 Trunnion Assembly Parts List Miter Gauge Parts List Splitter and Guard Assembly Splitter and Guard Assembly Parts List Stand Assembly Stand Assembly Parts List Table Extension and Legs Optional Accessory Electrical Connections Page Page Page Maintenance Checklist Model 66 Table SawPage Page WMH Tool Group

66 specifications

The Powermatic 66 is an iconic table saw that has earned a reputation for excellence among woodworkers and professionals alike. Introduced in the mid-20th century, this machine combines finely crafted engineering with user-friendly features, making it a staple in many workshops.

One of the standout features of the Powermatic 66 is its robust 3-horsepower motor. This powerful motor not only ensures efficient cutting but also provides the necessary torque for handling dense hardwoods and other tough materials. The motor is paired with a precision-ground cast-iron tabletop, which measures a generous 27 inches by 40 inches, providing ample workspace for larger projects while delivering stability and reducing vibration during operation.

The saw's design incorporates a unique cabinet-style base that offers exceptional durability and strength. The all-steel construction enhances rigidity, which aids in achieving precise cuts. Additionally, the heavy-duty base includes storage for accessories and blades, catering to the needs of woodworkers who value organization and convenience.

Another key feature of the Powermatic 66 is its advanced fence system, the Biesemeyer-style fence. Known for its accuracy, this fence glides smoothly along the rails and can be easily adjusted to different widths. It locks securely in place, allowing for repeatable cuts and maximum efficiency. The measuring scale is clearly marked, further enhancing usability.

The saw also boasts a 10-inch blade, capable of cutting through a variety of material thicknesses. The Blade Enclosure System allows for easier access when changing blades and minimizes dust buildup, which is critical for maintaining a clean work environment.

Safety is prioritized with features that include an anti-kickback pawl system and a blade guard, ensuring a reduced risk of accidents during operation. The Powermatic 66’s ingenuity extends to its dust collection capabilities, with an integrated port designed to work efficiently with shop vacuums, helping maintain cleanliness in the workspace.

In summary, the Powermatic 66 exemplifies the combination of power, precision, and safety, making it an indispensable tool for woodworkers. With its heavy-duty construction, innovative technology, and user-friendly features, the Powermatic 66 stands as a hallmark of quality in the woodworking industry. This saw is not just a machine; it’s a reliable partner for those who are serious about their craft.
Top Page Image Contents