Powermatic 66 Warranty and Service, More Information WMH Tool Group Warranty

Page 2

This manual has been prepared for the owner and operators of a Powermatic 66 Table Saw. Its purpose, aside from machine operation, is to promote safety using accepted operating and maintenance procedures. To obtain maximum life and efficiency from your table saw and to aid in using it safely, please read this manual thoroughly and follow the instructions carefully.

Warranty and Service

WMH Tool Group warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Repair Stations located throughout the United States can provide quick service or information.

In most cases, a WMH Tool Group Repair Station can assist in authorizing repair work, obtaining parts, or perform routine or major maintenance repair on your Powermatic product.

For the name of an Authorized Repair Station in your area, please call 1-800-274-6848, or visit our web site at www.wmhtoolgroup.com

More Information

Remember, WMH Tool Group is consistently adding new products to the line. For complete, up-to-date product information, check with your local WMH Tool Group distributor, or visit our web site at www.wmhtoolgroup.com

WMH Tool Group Warranty

WMH Tool Group makes every effort to assure that its products meet high quality and durability standards and warrants to the original retail consumer/purchaser of our products that each product be free from defects in materials and workmanship as follows: 1 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED OTHERWISE. This Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, repair or alterations outside our facilities, or to a lack of maintenance.

WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD SPECIFIED ABOVE, BEGINNING FROM THE DATE THE PRODUCT WAS PURCHASED AT RETAIL. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL WMH TOOL GROUP BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

To take advantage of this warranty, the product or part must be returned for examination, postage prepaid, to an Authorized Repair Station designated by our office. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will either repair or replace the product at our discretion, or refund the purchase price if we cannot readily and quickly provide a repair or replacement. We will return the repaired product or replacement at WMH Tool Group’s expense, but if it is determined there is no defect, or that the defect resulted from causes not within the scope of WMH Tool Group’s warranty, then the user must bear the cost of storing and returning the product. This warranty gives you specific legal rights; you may also have other rights, which vary from state to state.

WMH Tool Group sells through distributors only. Members of the WMH Tool Group reserve the right to effect at any time, without prior notice, alterations to parts, fittings and accessory equipment, which they may deem necessary for any reason whatsoever.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Inch Table Saw Part No. M-0460231NTWarranty and Service More Information WMH Tool Group WarrantyTable of Contents Page Page Introduction Specifications 8 at 90-degrees 2-1/8 at 45-degreesContents of the Shipping Container UnpackingMounting Extension Wings Installation and AssemblyTools required for assembly Use care when working with or around sharp saw blade Installing BladeSplitter and Guard Assembly Optional Wood Extension TableGrounding Instructions Motor CoverBlade Raising and Tilting AdjustmentsExtension Cords Miter Slot AlignmentBelt Tensioning Tilt Stop AdjustmentMiter Gauge Adjustment Splitter Alignment Insert AdjustmentBlade Raising Mechanism Adjustment Arbor and Arbor Bearing RemovalTilting Mechanism Adjustment Operating Instructions for Table SawsPage Rip Sawing Resawing CrosscuttingBevel and Miter Operations Do not use the standard table insert for dadoing operations Safety DevicesDado Cutting Feather Board FigurePush Block & Push Stick Figures 39 MaintenanceFiller Piece Figure Page Probable Cause Remedy TroubleshootingTrouble Optional Accessories Replacement PartsParts List Trunnion Assembly Index No. Part No Description Size Qty3530006 Trunnion Assembly Parts List Miter Gauge Parts List Splitter and Guard Assembly Splitter and Guard Assembly Parts List Stand Assembly Stand Assembly Parts List Table Extension and Legs Optional Accessory Electrical Connections Page Page Page Maintenance Checklist Model 66 Table SawPage Page WMH Tool Group

66 specifications

The Powermatic 66 is an iconic table saw that has earned a reputation for excellence among woodworkers and professionals alike. Introduced in the mid-20th century, this machine combines finely crafted engineering with user-friendly features, making it a staple in many workshops.

One of the standout features of the Powermatic 66 is its robust 3-horsepower motor. This powerful motor not only ensures efficient cutting but also provides the necessary torque for handling dense hardwoods and other tough materials. The motor is paired with a precision-ground cast-iron tabletop, which measures a generous 27 inches by 40 inches, providing ample workspace for larger projects while delivering stability and reducing vibration during operation.

The saw's design incorporates a unique cabinet-style base that offers exceptional durability and strength. The all-steel construction enhances rigidity, which aids in achieving precise cuts. Additionally, the heavy-duty base includes storage for accessories and blades, catering to the needs of woodworkers who value organization and convenience.

Another key feature of the Powermatic 66 is its advanced fence system, the Biesemeyer-style fence. Known for its accuracy, this fence glides smoothly along the rails and can be easily adjusted to different widths. It locks securely in place, allowing for repeatable cuts and maximum efficiency. The measuring scale is clearly marked, further enhancing usability.

The saw also boasts a 10-inch blade, capable of cutting through a variety of material thicknesses. The Blade Enclosure System allows for easier access when changing blades and minimizes dust buildup, which is critical for maintaining a clean work environment.

Safety is prioritized with features that include an anti-kickback pawl system and a blade guard, ensuring a reduced risk of accidents during operation. The Powermatic 66’s ingenuity extends to its dust collection capabilities, with an integrated port designed to work efficiently with shop vacuums, helping maintain cleanliness in the workspace.

In summary, the Powermatic 66 exemplifies the combination of power, precision, and safety, making it an indispensable tool for woodworkers. With its heavy-duty construction, innovative technology, and user-friendly features, the Powermatic 66 stands as a hallmark of quality in the woodworking industry. This saw is not just a machine; it’s a reliable partner for those who are serious about their craft.
Top Page Image Contents