Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for a Powermatic Model PM3000 Cabinet Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com.
Specifications |
|
|
Model number | PM3000 | |
Stock Number | 1720305K | |
Motor | TEFC, 7.5HP, 3Phase, 230/460V | |
Table size with standard extensions (L x W/in.) | 48 x 38 | |
Table size without extensions (L x W/in.) | 26 x 38 | |
Arbor diameter (in.) | 1 | |
Saw blade diameter (in.) | 14 | |
Arbor speed (RPM) | 3450 | |
Left tilt range (deg.) | ||
Maximum depth of cut (in.) | ||
Maximum diameter of dado (in.) | 8 | |
Maximum width of dado cut (in.) | 13/16 | |
Maximum rip to right of blade (in.) | 50 | |
Maximum rip to left of blade (in.) | 14 | |
Table surface in front of saw blade at max. depth of cut (in.) | .......................................................... | |
Drive system | ||
Table height to floor (in.) | 35 | |
Dust port diameter (in.) | 4 | |
Minimum dust collection required (CFM) | 350 | |
Approximate weight, complete kit: |
|
|
Net Weight (lbs.) | 750 | |
Shipping weight (lbs.) | 820 | |
Approximate weight, saw only (minus fence, rails, wood extension table and legs): | ||
Net Weight (lbs.) | 610 | |
Shipping (lbs.) | 695 | |
* 460V operation requires additional purchase of 460V switch (stock no.
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury
6