Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Powermatic Model PM2000 Table Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or Powermatic. Powermatic can also be reached at our web site: www.powermatic.com.
Specifications |
|
Model number | PM2000 |
Stock Number |
|
3HP, 230V, 60Hz, 1 Phase, 3600 RPM, 13A, TEFC | 1791999 |
5HP, 230V, 60Hz, 1 Phase, 3600 RPM, 21A, TEFC | 1791998 |
5HP, Prewired 230V (for 460V see Note below), 60Hz, 3 Phase, 3600 RPM, 12/6A, TEFC......1791997 | |
Table size with standard extensions (L x W/in.) | 42 x 30 1/2 |
Table size without extensions (L x W/in.) | 22 x 30 1/2 |
Arbor diameter (in.) | 5/8 |
Saw blade diameter (in.) | 10 |
Arbor speed (RPM) | 4300 |
Left tilt range | |
Maximum depth of cut (in.) | |
Maximum diameter of dado (in.) | 8 |
Maximum width of dado cut (in.) | 13/16 |
Drive system | |
Table height to floor (in.) | |
Dust port diameter (in.) | 4 |
Caster elevation (in.) | 1/8 |
Shipping weight (saw only) | All Models: Net: 540 lbs, Gross: 604 lbs |
Note: For 460V operation, magnetic switch (Part No.
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury
6