Searching 
Storing Frequencies Found During a Search
To store frequencies you find in a fine tune or service bank search:
1.Press PSE at the frequency you want to store.
2.Press ENT/PROGRAM to enter programming mode.
3.The screen flashes, alternating between the smallest empty channel number in the current bank, 000.000, and the frequency you want to store.
BANK0123456789 PGM
4.If you want to change the bank, enter the bank number using the number keys.
Note: If there are no empty channels, the scanner selects the first channel in the bank.
5.If you want to change the channel, Press T or S.
6.Press ENT/PROGRAM to store the frequency or •/CLR/DELAY to cancel.
Note: If the same frequency already exists on another channel, the scanner beeps and displays that channel. Press •/CLR/DELAY to cancel, or press ENT/PROGRAM to store the frequency in both channels.
Search Skip Memory
You can skip up to 50 unwanted frequencies during a fine tune or service bank search.
Note: You cannot skip frequencies during WX service search.
To skip a frequency, press L/O when the scanner stops on the frequency during a search. The scanner stores the
To clear a single frequency from skip memory:
1.Press PSE to stop the search.
2.Press T or S to select the frequency. L/O appears.
13