Wachsmuth & Krogmann MW5798 Quick Start, To 7 is for AAA, AA, C or D size rechargeable batteries

QUICK START

1.Plug the AC/DC adaptor into the electrical outlet, and the jack plug into the charger.

2.Open the lid by sliding down the “Open” button.

3.Insert the rechargeable batteries you want to charge. For AAA, AA, C or D size, place two pieces of battery of the same size into the same compartment. For 9V batteries, place in either/both slots between the two compartments.

(Step 4 to 7 is for AAA, AA, C or D size rechargeable batteries)

4.If you need to discharge the batteries, press the yellow Discharge Button.

5.If you need to deep condition the batteries, press the yellow Discharge Button and hold it until a “beep” sound is heard, and the “Ready” green LEDs flashes. Release the button.

6.The compartment that has the batteries placed first will be charged first. Or if both compartments have batteries placed in at the same time, Compartment 1 will be charged first.

7.The batteries are ready to be removed from the compartment when the “READY” LED for the corresponding compartment begins to flash.

(Step 8 to 9 is for 9V rechargeable batteries)

8.The charger can charge 1 or 2 pieces of 9V batteries at the same time.

9.9V batteries cannot be discharged or deep conditioned. Once the battery is placed into the slot, the red LED underneath the battery will light up until the battery is removed.

-5 -