SAFETY PRECAUTIONS
of back related injuries. Always lift the FLOOR COVERING SCRAPER with leg muscles and not with the back.
6)Prolonged use of the FLOOR COVERING SCRAPER (or other, similar machines) exposes the operator to vibrations which may produce Whitefinger Disease (Raynaud's Phenomenon). This phenomenon reduces the hand's ability to feel and regulate temperature, produces numbness and burning sensations and may cause nerve and circulation damage and tissue necrosis. Antivibration systems do not guarantee that you will not sustain Whitefinger Disease. Therefore, continuous and regular users should closely monitor the condition of their hands and fingers. After each period of use, exercise to restore normal blood circulation. If any of the symptoms appear, seek medical advice immediately.
7)Clothing must be sturdy and snug fitting, but allow complete freedom of movement. Never wear loose fitting jackets, scarves, neckties, jewelry, flared or cuffed pants or anything that could become caught on controls or moving parts. Wear long pants to protect your legs. Protect your hands with heavy duty, nonslip gloves to improve your grip. Good footing is most important when operating the FLOOR COVERING SCRAPER. Wear sturdy boots with nonslip soles.
8)Visually inspect the FLOOR COVERING SCRAPER, blade(s), and accessories for damaged or worn parts. Check for loose and/or broken parts. Determine that operator controls work freely, all safety devices are operative and information/safety decals are readable. Check to determine that the FLOOR COVERING SCRAPER and all related accessories are in good mechanical condition BEFORE utilization.
9)The FLOOR COVERING SCRAPER and related accessories are not classified as being insulated. Contact with electrical cables, gas lines and other hazardous items can result in electrocution and/or an explosion.
10)Know how the controls operate. Know how to stop the motor quickly in an emergency. Always start the
motor according to the instructions as outlined in this manual to minimize the possibility of unexpected or uncontrolled blade/accessory oscillation. Unexpected blade/accessory rotation can cause loss of machine control, and the possibility of property damage and/or personal injury.
11) Never exceed the recommended capacities of the
FLOOR COVERING SCRAPER. Refer to the Specifications section of this manual for more
detailed information. Always utilize the correct blade and extension cord designed for use with the FLOOR COVERING SCRAPER. Use of an incorrect blade or extension cord can result in property damage and/or personal injury.
OPERATION.
1)Give complete and undivided attention to the job at hand. Do not chew gum, smoke and/or use smokeless tobacco while utilizing the FLOOR COVERING SCRAPER. Do not attempt to eat and/or drink while utilizing the FLOOR COVERING SCRAPER. Determine that eyeglasses, hearing aid devices and other medical related devices are properly secured. Keep shoes properly laced. Use of the FLOOR COVERING SCRAPER is strenuous and causes fatigue. Help prevent the cause of an accident. Plan to take work breaks as required to help maintain proper mental and physical alertness.
2)The FLOOR COVERING SCRAPER is not sealed or insulated. Do not operate the FLOOR COVERING SCRAPER in an explosive atmosphere or near combustible materials. Refer to current OSHA rules and regulations.
3)The FLOOR COVERING SCRAPER is designed for use by one operator. Use of the FLOOR COVERING SCRAPER by more than one operator can lead to confusion and loss of control, resulting in property damage and/or personal injury. Never operate the FLOOR COVERING SCRAPER with an improper number of operators. Such a configuration can result in property damage and/or personal injury. If it is felt that more than one person is required to furnish additional "force" to the blade, STOP and contact the Customer Service Department for specific operational and service/maintenance information. There is no charge for this service.
4)Do not operate the FLOOR COVERING SCRAPER with onlookers close by. Caution all onlookers to stand clear. The coverings removal process process can result in flying particles being emitted at high velocity and striking the operator and/or onlookers. This can lead to the possibility of property damage and/or
| OPERATION AND PARTS MANUAL REV #4 (05/28/09) | PAGE 9 |
|
|
|