TABLE OF CONTENTS
MULTIQUIP
Table Of Contents | 3 | |
Parts Ordering Procedures | 4 | |
Notice to Operators | ||
Operator Instructional Data Sheet | 7 | |
Safety Precautions | 8 | |
Preparation | 8 | |
Operation | 9 | |
Maintenance, Repair and Storage | 10 | |
Assembly | 11 | |
Removing the Floor Covering Scrapper from the Pallet | 11 | |
Installation of the Adjustable Section of the Operator Handle | 11 | |
Before Starting the Motor | 12 | |
Theory of Operation | 12 | |
Blade Configurations, Accessory Attachments and Applications | 12 | |
Installing a Blade or the Ceramic Tile Ripper Attachment to the Floor Covering Scrapper | 14 | |
Removing a Blade or the Ceramic Tile Ripper Attachment from the Floor Covering Scrapper | 17 | |
Operation | 19 | |
Operational Disclaimer | 19 | |
California Proposition 65 Disclaimer | 19 | |
Transporting the Floor Covering Scraper | 20 | |
Adjusting the Operator Handle Height | 21 | |
Starting the Floor Covering Scraper On the Jobsite | 21 | |
Operating the Floor Covering Scraper On the Jobsite | 24 | |
Stopping the Floor Covering Scraper On the Jobsite | 27 | |
Operational Parameters and Techniques for the Floor Covering Scraper | 28 | |
Service | 29 | |
Preventative Maintenance Check List | 29 | |
Lubrication Requirements | 30 | |
Electric Motor Service | 31 | |
Troubleshooting | 32 | |
Electric Motor | 32 | |
Operational Problems | 32 | |
Storage | 33 | |
Specifications | 34 | |
Explanation of Codes in Remarks Column | 36 | |
Recommended Spare Parts | 37 | |
Component Parts Drawings |
|
|
Adjustable Axle Assembly | ||
Replacement Cutting Blades Assembly | ||
Frame Assembly | ||
Operator Handle Assembly | ||
Decals | ||
OPERATION AND PARTS MANUAL REV #4 (05/28/09) | PAGE 3 |