Multiquip manual HS81A CUT-OFF SAW Blade Installation Instructions

HS81A CUT-OFF SAW — BLADE INSTALLATION INSTRUCTIONS

Figure 4. Tool Kit

Blade Installation Procedure

STEP 1

For proper installation, first remove the blade shaft nut , outer flange , and inner “dual-arbor” flange .

Figure 5. Inner and Outer Flanges (Removal) STEP 2

A dual sided, “dual-arbor” inner flange accommodates either a 20 mm or 1-inch arbor hole for operator safety and convenience. The outer flange fits on top of the cutting blade.

The Multiquip Side Winder Cut-Off Saw comes with a Tool Kit (Figure 4) that assists you with day to day operations.You will need these tools for the assembly of your saw.

Item is a versatile screwdriver/wrench that accommodates common bolt/screw and nut head sizes of your saw.

Item  is the wrench necessary to accommodate various allen screws.

STEP 3

Chose the proper blade arbor side of the inner flange (to match your cutting blade arbor) and place this selected side to the

blade shaft .

Figure 7. Selecting the Proper Blade Arbor

STEP 4

Match the arbor side to the dimension of your blade arbor and “sandwich” between the inner and outer flanges. Tighten the blade shaft nut securely to hold the blade in place.

Figure 6. Inner and Outer Flanges (Placement) Figure 8. Securing the Cutting Blade

PAGE 16 — HS81A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #2 (07/26/10)