Multiquip AR13HAR manual AR13HA-R RIDE-ON Roller Initial START-UP

AR13HA-R RIDE-ON ROLLER — INITIAL START-UP

Initial Start-up Instructions

Starting

CAUTION - General Operation Safety

DO NOT attempt to operate the roller until the Safety, General Information and Inspection sections have been read and understood.

1.Placeyourfootintotheroller'sfootstep,grabholdofthehand rail located on the steering console, and lift yourself onto the platform.

2.Sit down in the operators seat and adjust the seat for a confortable position, then fasten the seat belt (Figure 17) aroundyourwaist.NEVER!operatetherollerwithouttheseat beltbeingfastened,seriousinjurycouldoccuriftheseatbelt is not used.

Figure 17. Securing Seat Belt

3.Beforestartingengine,makesuretheimmediateareaisfree of obstructions and debris that may lay in the roller's path.

4.Make sure that the roller's shift lever (Figure 18) is placed in the neutral position.

PUSH-IN, THEN PULL

TO SET THROTTLE

(RPM’s)

THROTTLE RELEASE	PUSH ALL THE WAYDOWN
AND IDLE BUTTON	TO IDLE ENGINE

THROTTLE LOCK

KNOB, TURN CLOCKWISE

TO LOCK THROTTLE CABLE.

Figure 19. Throttle Control

7.Insert the ignition key into the ignition (Figure 20), then turn and hold the key in the clockwise position until the engine starts, release key.

Figure 20. Ignition Switch

8.Iftheenginedoesnotstart,repeatsteps1through7 orconsult the troubleshooting guide contained in this manual.

9.Let the engine warm for 3 to 5 minutes before using roller. Check for fuel and oil leaks, and noises that would associate with a loose guard and/or covers.

Figure 18. Shift Lever

5.Incoldweather,starttheroller withthechoke fully closed. In warm weather or when the engine is warm, the roller can be started with choke halfway or completely open.

6.PUSH the "RED" button (Figure 19) on the throttle control

and pull the round black knob about halfway out. Make sure that the throttle lock knob has been dis-engaged.

10.If necessary return the choke knob to the full OPEN position.

The CLOSED position of the choke knob enriches the fuel

NOTEmixture for starting a COLD engine. The OPEN position provides the correct fuel mixture for normal operation after starting, and for restarting a warm engine.

AR13HA-R RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #9 (06/28/11) — PAGE 25