AR13HA-R RIDE-ON Roller General Information

AR13HA-R RIDE-ON ROLLER — GENERAL INFORMATION

The AR-13H roller has been designed for asphalt application and compaction of granular soils used in site preparation. Use the machine only for the purpose intended and by experienced personnel who understand this operating manual and all safety decals. Typical applications for this roller are driveways, patch work and road repairs. Standard features included with this roller are articulated steering, double drum hydrostatic drive, front drum vibration, high curb clearance and on board water capability.

POWER PLANT

The AR-13H roller is powered by a Honda GX-610, air cooled, gasoline engine rated at 18 hp @3,500 rpm.The engine features a side-mounted muffler designed to direct engine exhaust away from the operator.In the event of low oil, this engine has a built in "oil alert system" that will shut-down if the engine oil level reaches an unsafe operating level.

HYDRAULIC SYSTEM

The Honda GX-610 engine drives an axial hydraulics, variable displacement pump which is manually controlled via a cable control system. Pump flow is directed through an aluminum block manifold which provides the control for the 3 hydraulic motors.

The hydraulic drum drive system incorporates a parallel closed loop configuration operating at a maximum pressure of 2,900 psi. In addition this hydraulic system offers a "free wheel valve" which allows the roller to be towed in the event of an emergency.

COMPACTION SYSTEM

The compaction force is delivered by a 36-inch wide steel drum with beveled edges to help prevent asphalt marring. A fully enclosed hydrostatic drive system offers a variable speed control as well as smooth acceleration and braking.

Connected to the axial hydraulic pump is a gear pump that provides power for the drum vibratory system and the articulating steering system. Oil from this pump flows to the manifold control valve block and then to a hydraulic motor which rotates the eccentric weights inside a sealed housing containing oil to lubricate the bearings.

A pushbutton switch located on top of the gearshift lever when pressed activates a hydraforce valve that engages or disgages the vibratory action. The drum's vibratory action generates 3,100 lbs. (1,406 Kg.) of centrifugal force at a frequency of 4,000 vpm (vibrations per minute). If the vibration appears to be weak or slow, allow the machine to warm-up thoroughly, and check the hydraulic oil level. Add hydraulic oil if necessary.

The vibrator housing and drum are shock mounted to isolate the engine compartment and operator from vibration.

The roller nominally has an operating weight of 3,088 lbs (1,400 Kg.), but can be increased to 3,309 lbs (1,500 Kg.) by adding water ballast to the rear drum.

HYDRAULIC OIL FILTER SYSTEM

The hydraulic system oil is filtered by a screen type filter located in the reservoir filler neck, then doubled filtered within the system first by a 40 micron mesh-type suction filter located in the tank and the by a Zinga 10 micron, cartridge style spin-on return line filter.

ARTICULATED STEERING SYSTEM

Power for the articulated steering system, which uses a single hydraulic cylinder is provided by the gear pump. This steering system can produce an inside turning radius of 109 inches (2.77 meters).

SPRINKLER SYSTEM

A 60 gallon (227 liters) water tank with a gravity feed spray bar is provided for wetting the roll for asphaltic pavement rolling.

The water system is fully adjustable from the operator’s position by adjusting the two water valves. The front valve controls the water supply to the front drum, and the rear valve controls water to the rear drum.

Before starting an asphalt rolling job, be sure all spray bar holes are clear of dirt or foreign matter and are working. Always use clean fresh water in the water tank.To prevent rust and foreign debris from clogging the spray bar holes, drain and flush water tank and spray bars every 30 days.

LIFTING THE ROLLER

When lifting of the roller is required, attach a suitable hook or shackle to the lifting eye of the roller. These lifting points (4) are marked by a lifting hook decal. Make

sure the lifting device is capable of lifting 4,000 lbs. (1,814 Kg).

DANGER - Clear Obstacles from Area

Before operating the roller, make sure that personnel and obstacles are free from the roller’s path. Serious injury or even death can result!

The forward-reverse control lever operates the hydrostatic pump which governs the roller speed and direction of travel.The speed in which movement of this lever is made is directly related to the amount of pressure that is applied to the travel lever in each direction.Travel speed is infinitely variable from 0 to 4.8 mph.The neutral position of this lever will cause the roller to stop.

PAGE 16 — AR13HA-R RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #9 (06/28/11)

AR13HA, AR13HAR specifications

The Multiquip AR13HAR and AR13HA are advanced, rugged, and efficient walk-behind rollers designed for various construction and road maintenance applications. These compact rollers are specifically engineered to handle asphalt and soil compaction tasks, making them ideal for both professional contractors and do-it-yourself enthusiasts seeking high-quality performance in compact spaces.

One of the standout features of the Multiquip AR13HAR and AR13HA is their excellent maneuverability. With their tight turning radius, these rollers can easily navigate confined areas, allowing for effective compaction even in challenging sites. This makes them particularly useful for patching, trench work, and other localized applications.

The AR13HAR model is equipped with a reliable water-cooled engine that delivers robust power, ensuring consistent performance throughout the compaction process. The hydraulic system offers smooth operation, allowing operators to adjust the roller's speed and direction with ease. The self-propelled functionality further enhances user experience, catering to various operator preferences.

In terms of compaction capability, both models are fitted with high-frequency vibrating plates that facilitate superior compaction results. The AR13HAR and AR13HA can achieve impressive compaction depths, making them suitable for a wide range of material types. Users can expect consistent and uniform compaction across the working surface, which is essential for building durable pavements and bases.

Another important aspect is their durability. Multiquip has crafted the AR13HAR and AR13HA with robust materials, ensuring that they can withstand the rigors of construction sites. The rollers feature reinforced frames and sturdy drums designed to endure harsh conditions, contributing to a longer lifespan with less maintenance required.

Safety is also a priority in the design of these rollers. They come equipped with essential features like an emergency stop switch and operator protection measures to ensure a secure working environment. Additionally, the ergonomic controls are intuitively positioned, promoting operator comfort and reducing fatigue during extended use.

Overall, the Multiquip AR13HAR and AR13HA represent a perfect fusion of power, agility, and safety in compact roller technology. Their impressive features and robust design make them a reliable choice for professionals looking to enhance efficiency and productivity in their compaction projects. Whether it's a small repair task or a larger construction job, the Multiquip AR13 series can deliver results that meet and exceed expectations.