Samsung LW15E23CB, LW17E24CB manual Power Saver

15” : 30 ~ 69 kHz

17” : 30 ~ 81 kHz 56 ~ 75 Hz

15” : 1024 x 768 @ 75Hz

17” : 1280 x 1024 @ 75Hz

Troubleshooting: Before Contacting Service Personnel

On PC mode, image is not stable and may appear to vibrate.

◆Check that the display resolution and frequency from your computer or video board is an available mode for your set. On your computer check: Control Panel, Display, Settings.

◆If the setting is not correct, use your computer utility programme to change the display settings.

➣Your set supports multiscan display functions within the following frequency domain:

Horizontal frequency -

Vertical frequency -

Maximum refresh rate -

On PC mode, image is not centered	◆	Adjust the horizontal and vertical position.
on the screen.
You need the Monitor driver software.	◆	Download the driver from WWW pages:
		http://www.samsungusa.com/monitor
		http://www.samsung-monitor.com

Power Saver

This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.

State	Normal Operation	Power-Saving Function mode
		(EPA/NUTEK)
Horizontal Sync	Active	Inactive
Vertical Sync	Active	Inactive
Power Indicator	Green	Green, Blinking (1 sec interval)
Power Consumption	LW15E23CB : 48W (Max.)	Less than 2W
	LW17E24CB : 58W (Max.)

➣This set automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard.

English-39