Vector VEC021STC owner manual Contents

Page 4

CONTENTS

1.

INTRODUCTION

5

2.

USING POWER ON BOARD™ AS A JUMP-START SYSTEM

5,6

 

2.1

Easy, Step-by-Step Jump-starting Instructions

7,8

3.

CHARGING/RECHARGING

9

 

3.1

110/120 Volt AC Charging

9

 

3.2

12 Volt DC Charging

10

 

3.3

Estimated Battery Life

10

4.

OPERATING AS A PORTABLE POWER SUPPLY

10

5.

EMERGENCY/WORK LIGHT

10

6.

COMPRESSOR/TIRE INFLATOR

11

 

6.1

Warnings for Compressor Use

11

 

6.2

Tire Inflation or Products w/ Valve Stem

11,12

 

6.3

Inflate other Articles (w/out Valve Stem)

12

 

6.4

Typical Inflation Times

12

7.

REPLACEMENT PARTS

12

 

7.1

Battery Disposal

13

 

7.2

Battery Replacement

13

 

7.3

Battery Disposal

13

8.

SPECIFICATIONS

13

9.

WARRANTY

14

4

Image 4
Contents JUMP-STARTER, AIR Compressor and 12 Volt DC Power Supply Safety Information First AIDPage Contents Introduction Additional Features Front ViewUsing the Power on Board AS a JUMP-START System System Negative Battery Terminal is Connected To Chassis EASY, STEP-BY-STEP JUMP-STARTING InstructionsCHARGING/RECHARGING Make Sure ALL Switches are Turned OFF During Recharging120 Volt AC Charging Operation AS a 12 Volt Portable Power Supply Estimated Battery LifeEMERGENCY/WORK Light 12 Volt DC ChargingAIR COMPRESSOR/TIRE Inflator Tire Inflation or Products with a Valve StemInflating Other Articles Without Valve Stem Replacement PartsTypical Inflation Times Specifications Bulb ReplacementBattery Replacement Battery DisposalTWO Year Limited Warranty Program Page REV.DK051903