Vector VEC256 owner manual Contents

Page 3

and operate the compressor from an external 12 volt DC source.

4.To avoid over-inflation, carefully follow instructions on articles to be inflated.

5.Never leave compressor unattended while in use. Allow unit to cool for five minutes after 10 minutes of continuous operation.

6.Do not use accessories that are not designed to be used with the compressor.

7.Do not place battery pack on heater and keep it out of sunlight.

8.Do not charge battery when it is at or above 122° F (50° C). Allow the battery pack to cool before charging.

CONTENTS

1.

INTRODUCTION

4

2.

ADDITIONAL KEY FEATURES

5

3.

ATTACHING THE AIR HOSE

5

4.

POWERING THE COMPRESSOR

6

 

4.1

Powering from the battery pack

 

4.2

DC Power Adapter Use

6

5.

CHARGING/RECHARGING THE BATTERY PACK

7

 

5.1

AC Recharge of battery pack

7

6.

COMPRESSOR/TIRE INFLATOR

8

 

6.1

Tire inflation or products with a valve stem

8

 

6.2

Inflate other articles (without valve stem)

8, 9

7.

TYPICAL INFLATION TIRES

9

8.

MAINTENANCE/REPLACEMENT PARTS

9

9.

BATTERY REMOVAL/REPLACEMENT

10

10. BATTERY DISPOSAL

10

11. SPECIFICATIONS

10

 

WARRANTY

11

3

Image 3
Contents Warranty Information Near moving objects, doors or sharp objects Important Safety InformationContents Introduction Attaching the AIR Hose Additional KEY FeaturesPowering the Compressor Powering from the Battery PackDC Power Adapter USE AC Recharge of Battery Pack CHARGING/RECHARGING the Battery PackCOMPRESSOR/TIRE Inflator Tire Inflation or Products with a Valve StemInflate Other Articles Without Valve Stem Typical Inflation Times MAINTENANCE/REPLACEMENT PartsBattery REMOVAL/REPLACEMENT Battery DisposalSpecifications Vector 1 Year Limited Warranty Program Warranty Registration