Vector VEC256 owner manual Typical Inflation Times, MAINTENANCE/REPLACEMENT Parts

1.Open the nozzle hatch cover and remove the required nozzle.

2.Remove the hose from the compressor outlet by loosening (counterclock- wise) the hose retaining ring and sliding out the ribbed brass fitting.

3.Close the nozzle hatch cover.

4.Insert the selected nozzle into the compressor outlet and secure it by tightening the hose-retaining ring as above.

5.After using the compressor, remove and store the nozzle in the nozzle hatch.

Refer to “Typical Inflation Times” for approximate pressure and time. Smal- litems like volleyballs, footballs, etc. inflate very rapidly.

•Insert nozzle (e.g needle) into item to be inflated and inflate to desired pressure

•Turn ON compressor switch - inflate to desired pressure or fullness

7.TYPICAL INFLATION TIMES

The following are approximate pressure and inflation times for various items.

WARNING: Always follow tire manufacturers recommendations for pressure on item to be inflated.

VEHICLE AND TRAILER TIRES		TIME FROM “0” PRESSURE
TIRE SIZE	PRESSURE
155/80R 13”	.... 26 PSI	2.50 MIN.
185/70R 14”	.... 30 PSI	4.50 MIN.
235/75R 15”	.... 30 PSI	6.50 MIN.
235/85R 16”	.... 50 PSI	16.00 MIN.
BICYCLE TIRES		TIME FROM “0” PRESSURE
TIRE SIZE	PRESSURE
27 X 1” RACING	10 PSI	40 SEC.
INFLATABLE ARTICLES
ITEM		PRESSURE	T I M E F R O M
“0” PRESSURE
FOOTBALL	13 PSI	24 SECONDS
BASKETBALL	9 PSI	20 SECONDS
VOLLEYBALL	5 PSI	6 SECONDS

8.MAINTENANCE/REPLACEMENT PARTS

For replacement parts (batteries, DC power adapters, AC charging adapters, cables, etc.), contact Vector Technical Support: (954) 584-4446 or toll free at 866-584-5504. Periodically, cables, hose, nozzles and connectors should be inspected for damage, corrosion, dust and dirt. If surfaces are dirty, they

9