90551961 VEC010C REVISED.qxp:VEC012C_ManualEN_090407 9/11/09 8:10 AM Page 5
Controls and Indicators
|
|
|
|
| 5 |
| |
| 2 | 3 |
|
|
|
|
|
|
|
|
|
| 6 |
|
|
|
|
|
|
| 7 |
|
|
1 |
| 4 |
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
| 8 | ||
|
|
|
| 9 | 10 |
| |
|
|
|
|
| |||
|
|
|
|
|
| ||
|
| Front View |
|
| Back View | ||
1. | CHARGING PORT FOR 120 VOLT AC | 5. AIR PRESSURE GAUGE | |||||
| CHARGING ADAPTER | 6. | INFLATOR POWER SWITCH | ||||
2. | BATTERY CHARGE LEVEL PUSHBUTTON | 7. | NEGATIVE | ||||
3. | LED BATTERY STATUS INDICATORS | 8. | POSITIVE (+) RED CLAMP | ||||
4. | 9. CONNECTOR (CHUCK) | ||||||
|
|
|
| 10. | AIR HOSE | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOZZLES
Applications
•
•Inflate (using inflator) tires, air mattresses, basketballs, volleyballs, and more.
CHARGING/RECHARGING
in frequent use,
Black & Decker recommends the battery be recharged at least every 60 days.
Check the battery charge level by pressing the battery status button. The LED charge status display will indicate the level of battery charge. When only one red LED lights, recharge the unit.
When the battery is overly discharged and if the green LED is lit when the charger is plugged in, this indicates the battery is at a high impedance stage.
In this event, recharge the unit and leave the unit on charge for a period of 48hrs before using the unit.
Notes: This unit is delivered in a partially charged state – you must fully charge it before using it for the first time. Initial AC charge should be for 48 hours.
Recharging battery after each use will prolong battery life; frequent heavy discharges between recharges and/or overcharging will reduce battery life. The battery can be recharged using the AC Charging Adapter (shown).
5