Panasonic SC-MAX370 specifications Clock and timers, Sound and illumination

Clock and timers

Setting the clock

This is a 24-hour clock.

1Press [CLOCK/TIMER] to select “CLOCK”.

2Within 20 seconds, press [3, 4] to set the time.

3Press [OK].

Press [CLOCK/TIMER] to show the clock for a few seconds.

Note:

•Reset the clock regularly to maintain accuracy.

•The clock is reset when there is a power failure or when the AC power supply cord is removed.

Play and record timer

Except for Bluetooth® source

You can set the timer to come on at a certain time to:

•Wake you up (play timer)

•Record from the radio or the external equipment

(record timer)

Play timer and record timer cannot be used together.

Preparation

Set the clock.

	1	Press [CLOCK/TIMER] to select “ PLAY” or
		“ REC”.
	2	Within 10 seconds, press [3, 4] to set the start
		time.
	3	Press [OK].
	4	Do steps 2 and 3 again to set the end time.
VQT5K74	5	Press [3, 4] to select the source you want to
		play or record and then press [OK].
	6	For record timer
14		Press [3, 4] to select “MEMORY” or “USB B” to
		keep the recording and then press [OK].

To start the timer

1Prepare the audio source.

•Play timer

Prepare the music source you want to listen to (disc, USB, internal memory, radio or external equipment) and set the volume.

•Record timer

Connect the USB device to (for USB recording) and tune to the radio station or select the external equipment.

2Press [PLAY/REC ] to select “ PLAY ON” or

“ REC ON”.

“ PLAY ON” or “ REC ON” is shown.

To cancel, press [PLAY/REC ] to select “TIMER OFF”.

The system must be switched off for the timer to operate.

To check the settings

Press [CLOCK/TIMER] to select “ PLAY” or “ REC”.

Note:

•The play timer starts at a low volume and increases gradually to the preset level.

•The record timer starts 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

Sleep timer

The sleep timer switches off the system after the set time.

Press [SLEEP-AUTO OFF] to select the setting (in minutes).

To cancel, select “OFF”.

30 MIN > 60 MIN > 90 MIN > 120 MIN > OFF ^=================n

Note:

•The play and sleep timer or the record and sleep timer can be used together.

•The sleep timer always comes first. Be sure not to set an overlap of timers.

Sound and illumination

Adjust the sound effect

You can adjust the sound effect.

1Press [SOUND] to select the sound effect.

2Press [2, 1] to select the desired setting.

•BASS/MID/TREBLE -4 to +4

•SURROUND

“ON SURROUND” or “OFF SURROUND”

•INPUT LEVEL (For AUX IN 2)

“NORMAL” or “HIGH”

Note:

Select “NORMAL” if the sound is distorted during “HIGH” input level.

•SUPER WOOFER

“SW1”, “SW2”, “SW3” or “OFF”

•D.BASS

“D.BASS ON”, “D.BASS BEAT” or “D.BASS OFF”

Note:

D.BASS BEAT:This function emphasizes the attack level of the drum beat and produces a punchy sound.

•Depending on the type of a track, the effect may be small.

Preset EQ

Press [PRESET EQ] (main unit: [ PRESET EQ]) to select desired preset.