Panasonic Troubleshooting Estereo : Internal Memory Issues, F61 Errors, and System Memory Reset Guide
Page 18

•The pairing of the device has been replaced. Do pairing again.

•This system might be connected to a different device. Disconnect the other device and try pairing the device again.

The device is connected but audio cannot be heard through the system.

•For some built-in Bluetooth® devices, you have to set the audio output to “SC-MAX370” manually. Read the operating instructions of the device for details.

Sound from the device is interrupted.

•The device is out of the 10 m communication range. Move the device nearer to the system.

•Remove any obstacle between the system and the device.

•Other devices that use the 2.4 GHz frequency band (wireless router,

microwaves, cordless phones, etc.) are interfering. Move the device nearer to the system and distance it from the other devices.

• Select “MODE 1” for stable communication.

The One-Touch Connection (NFC feature) is not working.

•Make sure the unit and the NFC feature of the device are turned on. (> 13)

Main unit displays

“USB A NO DEVICE” “USB B NO DEVICE”

• The USB device is not connected. Examine the connection.

“DEVICE FULL”

•You cannot do recording because the remaining recording time of the USB device is less than the total time of the music source. Change to a USB device which has enough recording time and do the recording again.

“ERROR”

• An incorrect operation was done. Read the instructions and try again.

“ERROR” (during recording)

• You cannot select other playback source (example:

 

 

radio, USB etc.) or press [:] or [9] during

VQT5K74

 

recording. Stop the recording function.

“F61”

 

•

You cannot open the disc tray when recording from an AM source.

18

•

Examine and correct the speaker cords connection.

• Disconnect the USB device. Switch off the system and

 

 

then switch it on again.

“F70”

•Examine the Bluetooth® device.

•Disconnect the Bluetooth® device. Switch off the system and then switch it on again.

“F77”

• Switch off the system and then switch it on again.

“NO PLAY”

“UNSUPPORT”

•Examine the content. You can only play supported format.

•The files in the USB device can be corrupted. Format

the USB device and try again.

• The unit may have a problem. Turn the unit off and then on again.

“NO TRACK”

• There is no album or track in the USB device or the internal memory.

“PLAYERROR”

•You played an unsupported MP3 file. The system will skip that track and play the next one.

“REMOTE 1” “REMOTE 2”

•The remote control and the main unit are using different codes. Change the code of the remote control.

-When “REMOTE 1” is shown, press and hold [OK] and [1] for a minimum of 4 seconds.

-When “REMOTE 2” is shown, press and hold [OK] and [2] for a minimum of 4 seconds.

“TEMP NG”

•The temperature protection circuit has been activated, and the system will switch off. Let the unit cool down before switching it on again.

•Check that the ventilation opening of the unit is not obstructed.

•Ensure this unit is well ventilated.

“USB OVER CURRENT ERROR”

•The USB device is using too much power. Disconnect the USB device, switch off the system and then switch on again.

“VBR”

•The system cannot show the remaining play time for variable bit rate (VBR) tracks.

System memory reset (initialization)

Reset the memory when the following situations occur:

•There is no response when buttons are pressed.

•You want to clear and reset the memory contents.

1Disconnect the AC power supply cord.

2While you press and hold [Í/I] on the main unit, connect the AC power supply cord again. Continue to press and hold the button (approximately 10 seconds) until “- - - - - - - -” is shown.

3Release [Í/I].

All the settings are set back to the factory preset. It is necessary to set the memory items again.

Remote control code

When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system.

Preparation

Press [RADIO/EXT-IN] to select “AUX 1” or “AUX 2”.

To set the code to “REMOTE 2”

1Press and hold [RADIO/EXT-IN] on the main unit

and [2] on the remote control until “REMOTE 2” is shown.

2Press and hold [OK] and [2] for a minimum of 4 seconds.

To set the code to “REMOTE 1”

1Press and hold [RADIO/EXT-IN] on the main unit and [1] on the remote control until “REMOTE 1” is shown.

2Press and hold [OK] and [1] for a minimum of 4 seconds.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Table of contents CD Stereo SystemSafety precautions Supplied accessories ReferencePreparing the remote control Placement of speakersMaintenance SetupMaking the connections Connect the AC power supply cordConserving power Connect the FM indoor antennaRemote control Overview of controlsFront view Disc Playing discViewing available information Play menu Connecting a USB deviceUSB and internal memory Program playbackUSB at a glance Recording to a USB device or the internal memoryBasic playback Title search PlaylistAdvanced recording functions Manual tuningRadio Improving the sound qualityAM allocation setting BluetoothMemory presetting Pairing a deviceLink mode One-Touch Connection Connecting by NFCBluetooth standby mode Disconnecting a deviceClock and timers Sound and illuminationDJ jukebox DJ functionsIllumination effects DJ samplerTo cancel the DJ effect Using a microphoneUsing the auxiliary input DJ effectsCustomer Service Directory Customer ServiceTroubleshooting USBSystem memory reset initialization Remote control codeSB-MAY370PUK SpecificationsSB-MAF370PUK SB-MAW370PUKIf you see this symbol

SC-MAX370 specifications

The Panasonic SC-MAX370 is an impressive compact audio system that captivates music enthusiasts with its powerful performance and versatile features. This all-in-one unit highlights Panasonic's dedication to audio fidelity and user convenience, making it an ideal choice for home entertainment.

One of the standout features of the SC-MAX370 is its robust output power. This system is designed to deliver a captivating sound experience, boasting a peak power output that ensures clear and dynamic audio across various genres. The powerful bass and crisp highs bring an immersive feel to both music and movie soundtracks.

A hallmark technology found in the SC-MAX370 is the Bass Blast feature, which enhances low-frequency range, delivering deep and thumping bass lines. This is particularly appealing for users who enjoy genres like hip-hop and electronic dance music. The system includes a built-in subwoofer that works in tandem with the Bass Blast technology, further amplifying the overall audio experience.

The SC-MAX370 is equipped with a variety of connectivity options, catering to modern digital lifestyles. Bluetooth connectivity allows for seamless wireless streaming from smartphones, tablets, and other compatible devices. Users can also engage with their favorite music through USB ports that support MP3 playback, enhancing compatibility with various media sources.

Another notable characteristic is the inclusion of the DJ Jukebox function, which lets users curate their playlists directly from their music library. This feature encourages interactive music sessions, making it a great choice for parties or social gatherings. The system also supports karaoke functions, allowing users to showcase their vocal talents while enjoying their favorite tracks.

For ease of use, the Panasonic SC-MAX370 comes with an intuitive remote control and a clear display interface, making navigation simple. Its compact design allows it to fit into various living spaces without occupying too much room. The stylish build and modern aesthetics of the unit ensure that it blends effortlessly with the home décor.

In conclusion, the Panasonic SC-MAX370 offers a compelling combination of powerful sound, modern features, and user-friendly design. Whether for casual listening, hosting gatherings, or karaoke nights, this compact audio system stands out as a reliable choice for anyone seeking quality audio performance in a stylish package.
Top Page Image Contents