Kompernass TLG 500 A1 Intended Use, Items supplied, Description of the appliance, Technical data

Page 4

BATTERY CHARGER

Intended Use

The Battery Charger is intended exclusively for:

for the charging of rechargeable Ni-Cd and Ni-MH batteries of the sizes AAA / AA / C / D and 9 V Block with standard commercial design capacity.

for charging both fast and standard rechargeable batteries.

domestic use only, it is not intended for commercial use.

Items supplied

Battery Charger

Operating manual

Description of the appliance

q 1LEDs (Operating status indicators) w Charging slots for 9 V Block batteries

(Charging slots 5 and 6; see fold-out side)

e Charging slots for AAA / AA / C / D batteries (Charging slots 1 to 4; see fold-out side)

Technical data

Input Voltage:

100 - 240 V ~

 

60/50 Hz

Power consumption :

130 mA

Protection class:

II /

Operating temperature:

0 ° C - 25 ° C

Storage temperature:

-20 ° C - 50 ° C

Output:

max. 3.34 VA

Output voltages:

4 x 1.4 V (Charging slots 1-4) 2 x 9 V (Charging slots 5-6)

Charging currents:

1000 mA (with 1-2 batteries)

500 mA (with 3-4 batteries)

2 x 30 mA (at 9 V battery)

Maximum design capacities:

AAA:

900 mAh

AA:

2500 mAh

C:

4000 mAh

D:

4500 mAh

9 V block:

200 mAh

Safety instructions

Fire hazard!

Do not place the Battery Charger:

where it would be subject to direct sunlight.

It could happen that the Battery Charger over- heats and becomes irreparably damaged.

in close adjacency to sources of heat. This inclu- des for example ovens, fan heaters and similar appliances, as well as the ventilation openings of electrical devices. The Battery Charger could be irreparably damaged.

in damp environments or in the vicinity of water. Moisture could permeate into the Battery Charger. There would then be the danger of receiving an electric shock and or causing a fire!

Only charge rechargable batteries of the types „Ni-Cd“ and „Ni-MH“. NEVER recharge batteries of other types or non-rechargable batteries. These are not suitable for recharging. Batteries not suitable for recharging can overheat and explode. It could irreparably damage the Battery Charger and the inserted batteries. There is also a risk of personal injury!

- 2 -

Image 4
Contents Battery Charger TLG 500 A1 TLG 500 A1 Content Technical data Safety instructionsIntended Use Items suppliedDo not place the Battery Charger Do not use damaged corroded batteriesCommissioning Charging batteriesReady for use LED of the charging slot glows green Capacity over 90 %Calculating the average charging time Current time Min. =Troubleshooting CleaningDisposal Case of doubt, please contact your waste disposal centreWarranty & Service Importer Ring not carried out by our authorized serviceAny way by this warranty Your goods be assured