Kompernass KH 4106 manual Storing the Mini-Compressor

Page 14

Turn the connection valve back and forth to make it easier to remove. When removing the connection valve air can escape from the valve of the object that has been inflated. Therefore ensure that the connection valve is removed as quickly as possible.

7.2 Using the Mini-Compressor to measure inflation pressure NOTE:

For measuring the pressure of an inflated object the Mini- Compressor does not require electricity.

1.Follow steps 3 to 6 in chapter 7.1 „Using the Mini- Compressor to inflate objects“.

2.Read off the inflation pressure on the mamometer of the Mini-Compressor.

3.To conclude, follow step 12 in chapter 7.1 „Using the Mini-Compressor to inflate objects“.

8. Storing the Mini-Compressor

Always store the Mini-Compressor at a clean and dry location.

To avoid damage, make sure that the air line and the power cable are not folded.

12

Image 14
Contents Kompernass Gmbh · Burgstrasse Mini-Compressor KH Page Page Content Mini-Compressor KH Thus Page Utilisation Continuous operating time Minutes Using the Mini-Compressor to inflate objects Page As soon as the desired air pressure is displayed on Storing the Mini-Compressor Cleaning the Mini-Compressor Kompernass Service Ireland