Kompernass XQ 310 manual Cleaning and Maintenance / Disposal / Information, Service centre

Page 10

Cleaning and Maintenance / Disposal / Information

appliance. Never permit fluids to permeate inside the appliance.

jUse a cloth to clean the casing. Never use petrol, solvents or cleansers that damage plastics.

A vacuum cleaner is required for thorough cleaning of the appliance.

jVentilation openings must never be obstructed.

jRemove adhering sanding dust with a brush.

Disposal

The packaging is made from environ- mentally-friendly material and can be disposed off at your local recycling plant.

Do not dispose of electrical appliances in normal house- hold refuse!

According to European Directive 2002 / 96 / EC for used electrical and electronic appliances and its adoption into national laws, worn-out electrical tools must be collected separately and subjected to an environmentally friendly recycling procedure.

Conformity Declaration / Manufacturer

We, Kompernaß GmbH, Burgstr. 21,

D-44867 Bochum, Germany, hereby declare that this product complies with the requirements of the following EC directives:

EC machine guideline (98 / 37 / EG)

EC Low Voltage Directive (2006 / 95 / EEG)

EMC (Electromagnetic Compatibility) (89 / 336 / EEG), (93 / 68 / EEG)

Type / Appliance Designation:

Parkside Orbital sander XQ 310

Bochum, 30.06.2007

Your local communal or municipal authorities can

Hans Kompernaß

provide information on how to dispose of the worn-

- Managing Director-

out appliance.

 

Information

Subject to technical changes in the course of further developments.

Service centre

Details of the service centre responsible for your country are contained in the warranty documentation.

12 GB/IE

Image 10
Contents Oscillating Sander Page Table of contents Intended use Delivery contents FeaturesIntroduction Safety at the Workplace Introduction / Safety InstructionsTechnical Data Electrical SafetySafety of Personnel Safety InstructionsCarefull Handling and Use of Electrical Hand Tools Appliance-specific Safety Instructions ServiceSafety Instructions / Operation Maintenance and Cleaning Operation / Maintenance and CleaningInstructions, tips and tricks Disposal Cleaning and Maintenance / Disposal / InformationService centre Conformity Declaration / Manufacturer