Metabo Hammer manual Piece, SDS-plus chisel set, Chiselling attachment Order, Anchor-head holder

SDS-PLUS ACCESSORIES

Chisel with SDS-plus shank end

Chisel shape	Overall	Cutting	Order
	length	width	no.
	mm
Pointed chisel,	250		6.30992
round tip
Pointed chisel,	250		6.31421
square tip
Flat chisel	250	20	6.31420
Scaling chisel	250	40	6.31425
Chasing gouge	250	22	6.31422
Mortar chisel,	130		6.31423
carbide-tipped
Mortar chisel,	200		6.31424
carbide-tipped
Tile chisel,	250	40	6.31456
offset
Assortment of chisels with SDS-plus shank end
			Order
			no.
	SDS-plus drill bit / chisel set		6.30477
	(5 piece)
	Consisting of hammer drill bits of
	Ø 6, 8, 10 mm (1 each),
	1 pointed chisel (6.31421) and
	1 flat chisel (6.31420)
	Plastic round box
	SDS-plus chisel set		6.30478
	(3 piece)
	Comprising
	1 pointed chisel (6.31421),
	1 flat chisel (6.31420) and
	1 scaling chisel (6.31425)
	Plastic round box
	SDS-plus chisel set		6.30484
	(5 piece)
	Comprising
	2 pointed chisels (6.31421),
	2 flat chisels (6.31420) and
	1 scaling chisel (6.31425)
	Plastic round box
Chiselling attachment
			Order
			no.
	In order to work without		6.31409
	rotary motion with the chisels
	6.31420, 6.31421, 6.31422,
	6.31423, 6.31424, 6.31425 and
	6.31426 you must use the
	chiselling attachment 6.31409.

Carbide core cutters, M 16 female thread

Optimised with larger carbide teeth for longer tool life. Higher power efficiency due to stably, thin-walled bit bodyFor concrete and masonry

Diameter	Working length	Order
mm	mm	no.
25	55	6.23390
30	55	6.23391
35	55	6.23392
40	55	6.23393
50	55	6.23394
68	55	6.23395
82	55	6.23396
90	55	6.23397
100	55	6.23398
112	55	6.23399
Carbide pilot drills for core cutters
Diameter	Overall length	Order
mm	mm	no.
8	120	6.27040
Anchor-head holders with
M 16 male thread
		Order
		no.
	Anchor-head holder	6.27041
	KW 11
	Overall length: 90 mm
	anchor-head holder	6.27043
	SDS-plus
	Overall length: 105 mm
	anchor-head holder	6.27042
	SDS-plus
	Overall length: 220 mm
Accessories
		Order
		no.
	Connector	6.30928
	With 1/2"-20 UNF thread for
	the connector 6.30283 for
	hammer drill bits with ratio
	thread and core cutters
	Connector	6.30283
	For hammer drill bits with
	ratio thread and for fitting
	the core bit using the pilot
	drill 6.23038
	Connector	6.31285
	With 1/2"-20 UNF thread for
	chuck and hexagon recess
	1/4" (6.35 mm) for screwdriver
	bits with bit retaining bush
	Bit retaining bush	6.31281
	For fitting bits and sockets with 1/4" (6.35 mm)
	hexagon in the spindle of drills and impact
	drills with spindle thread 1/2"-20 UNF and
	hexagon recess 1/4" (6.35 mm)
	Geared chuck	6.35035
	Clamping width: 1,5 - 13 mm
	Female thread: 1/2"-20 UNF
	Key size: 2

78