Northern Industrial Tools 2 HP / 8 GALLON AIR COMPRESSOR guide

KNOW YOUR COMPRESSOR
Air Filter	Handle

Air Regulator

Air

Chuck

Pressure

Gauges

Air Tank

Tank Drain Valve

Figure 1. Air Compressor

Handle: Convenient handle allows for easy transport of your air compressor.

Air Regulator: The air regulator controls the air flow pressure. Turn regulator clockwise to increase air pressure, counter-clockwise to decrease air pressure. Air Chuck: Convenient quick disconnect air chuck allows for fast easy connection to an air hose.

Tank Drain Valve: The Tank Drain Valve can be opened to allow moisture and compressed air to be released from the Air Tank.

WARNING! Tank Drain Valve should always be opened slowly to avoid damage to equipment and possible injury.

Air Filter: This heavy duty metal air filter keeps your compressor running cleanly, by filtering out impurities.

Oil Breather Cap: As the compressor motor operates pressurized air must be released from the crank case. The oil breather cap allows built up air to escape, while shielding your air compressor from airborne impurities.

Power Switch: The red tipped power switch turns the air compressor on and off. When switch is pulled up, compressor is turned ON. When switch is pulled down, compressor is turned OFF.

Note: Always make sure that compressor Power

Switch is in the OFF position before performing any maintenance or plugging the compressor into a power supply.

Pressure Gauges: These dual gauges indicate the amount of air pressure built up in the air tank, as well as the air pressure being delivered to the air chuck.

Safety Valve: The Safety Valve device relieves pressure from the Air Tank in the event of excessive pressure build up. The Safety Valve is preset at factory. Do not attempt to make any adjustments to the Safety Valve. Periodically pull ring on the Safety Valve end to check that it is working properly.

Air Tank: Powder coated steel tank, with a 8 gallon capacity, stores the compressed air until it is needed.

GETTING STARTED

Before operating your tool, check the contents of the box to make sure you have everything you will need.

Items included in the box:

Air Compressor

Air Filter

Oil Breather Cap

Bottle of Oil

Wheels (2)

Mounting Hardware for Wheels

Owner’s Manual

ASSEMBLY

NOTE: Before performing any assembly or maintenance make sure compressor is turned off and unplugged from the power supply.

Installing the Wheels

1. Locate the wheels, hex bolts, washers, and wheel nuts.

2. Insert hex bolt through center hole in wheel rim.

3. Insert the hex bolt, with wheel in place, through the hole located in the lower rear of the air compressor frame.

4. Slide washer onto the end of bolt which you have just pushed through the air compressor frame.

5. Securely tighten bolt in place with the wheel nut.

6. Repeat steps 2 through 6 for remaining wheel. (See Figure 2)

2 HP / 8 GALLON AIR COMPRESSOR specifications

The Northern Industrial Tools 2 HP / 8 Gallon Air Compressor is a versatile and reliable solution for a variety of air-powered applications. Designed with both performance and portability in mind, this air compressor is ideal for professionals and DIY enthusiasts alike. With a robust 2 horsepower motor, it delivers impressive power to meet the demands of numerous pneumatic tools.

One of the standout features of this compressor is its 8-gallon horizontal tank. This tank capacity strikes a perfect balance between maintaining steady air pressure and minimizing the physical footprint of the unit. The tank is constructed from durable steel, ensuring long-lasting performance and resistance to corrosion. The horizontal design facilitates stability and makes it easier to transport around job sites or workshops.

Equipped with a powerful oil-free pump, the Northern Industrial Tools air compressor requires minimal maintenance while providing reliable performance. The oil-free design eliminates the need for regular oil changes and reduces the risk of contamination, making it suitable for environments where moisture and oil-free air are essential. This feature also contributes to its overall efficiency, as it runs cooler and quieter than many traditional compressors.

The compressor operates at a maximum pressure of 125 PSI, providing ample power for a range of tasks such as inflating tires, operating nail guns, and powering air tools. The unit features a dual-gauge setup, which allows users to monitor both the tank and outlet pressure at a glance, ensuring optimal performance and safety during operation.

Another notable characteristic is its portable design, which includes a sturdy carrying handle and wheels for easy maneuverability. Weighing approximately 60 pounds, it strikes a balance between being lightweight enough for transport and sturdy enough for heavy-duty use.

Safety features such as a thermal overload protector help prevent overheating, adding an extra layer of reliability. Moreover, the compressor is equipped with a quick-connect air hose coupling system that simplifies attaching and detaching air tools, allowing for seamless transitions between tasks.

In summary, the Northern Industrial Tools 2 HP / 8 Gallon Air Compressor is a powerful, portable, and maintenance-friendly solution that meets the diverse needs of air-powered applications. Its combination of features, including an oil-free pump, robust tank, and user-friendly design, make it an excellent choice for both home workshops and professional job sites.