For technical questions and replacement parts, please call
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., Inc. Product! For future reference, please complete the owner’s record below:
Model: _______________ | Purchase Date: _______________ |
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment strongly recommends that this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you have first contacted Northern Tool + Equipment to determine if it can or should be performed on the product.
Before using this product, please read the following instructions carefully.
Technical Specifications
Item | Description |
Free Speed | 20, 000 RPM |
Air Consumption | 4 CFM |
Air Inlet Diameter | 1/4"- 18NPT |
Min. Hose Size | 3/8" |
Max. Air Pressure | 90 PSI |
Accessories | Hex Wrench, key, wheel Nut |
Cutting Wheel | Not included |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep this manual and invoice in a safe and dry place for future reference.
WARNING!
Some dust created by power sanding, sawing, grinding and other construction activities contains chemicals known to cause cancer, birth defects, or other reproductive harm. Some examples off these chemicals are:
•Lead from
•Crystalline silica form bricks, cement and other masonry products
•Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending now how often you do this type of work. To reduce your exposure to these chemicals: work in a
Page: 2 of 7