Porter-Cable COIL250 instruction manual Clearing a Jammed Fastener

Page 11

A rubber nose cushion (C) Fig. 26, is provided to reduce marring of the work surface. The rubber cushion can be pulled off to provide increased depth-of- drive for toe-nailing applications. The nose cushion can be stored in the rear area of the magazine (A) Fig. 27, when not in use.

Disconnect tool from air supply before removing or re- installing rubber cushion.

CLEARING A JAMMED FASTENER

Disconnect tool from air supply.

1.Open feeder cover and magazine nail holder. Remove any remaining fasteners from the nailer.

2.Use a slender, soft steel rod to drive the driver blade to its uppermost position. Use needle nose pliers to remove the jammed fastener (see Fig. 28).

3.Follow instructions in PREPARING THE TOOL to reload fasteners.

A

Fig. 27

Fig. 28

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Coil Nailer Portercable Important Safety Instructions Safety Guidelines / DefinitionsGeneral Safety Rules Page Noise level Technical SpecificationsForeword Power SourceEMPLOYER’S Responsibilities Functional DescriptionPage Operating Instructions Using the Tool with Selectable Triggering OptionsPage Clearing a Jammed Fastener Service and Repairs MaintenanceClean and Inspect Daily Accessories TroubleshootingPORTER-CABLE Limited ONE Year Warranty Canadian PORTER-CABLE Delta Service Centers
Top Page Image Contents