PYLE Audio 314 Troubleshooting Guide Maintenance, Keep Tool Clean, Failure to Start

Page 15

TROUBLESHOOTING GUIDE

For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

15

Image 15
Contents Trim Saw Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsGeneral Safety Rules General Safety Rules Safety Instructions for All Saws Additional Specific Safety RulesLower Guard Safety Instructions Symbol Definition Extension Cord Selection Carton ContentsFunctional Description MotorAssembly Operation Installing Plexiglas BladeTo Change SAW Blades To Adjust Depth of CUT To Adjust for Bevel CutsTo Attach the Base Insert To Attach the RIP Guide HOW to USE the SAWCrosscutting and Bevel Cuts To Follow the Line of CUTRipping Panel CutsPocket Cuts Troubleshooting Guide Maintenance Keep Tool CleanFailure to Start Lubrication Brush Inspection ServiceAccessories Replacement Parts Service and RepairsPORTER-CABLE Limited ONE Year Warranty WarrantyCanadian PORTER-CABLE Delta Service Centers