Makita AN922, AN942 instruction manual Nose adapter, Loading nailer

Page 12

Nose adapter

CAUTION:

Always lock the trigger and disconnect the hose before installing or removing the nose adapter.

When nailing workpieces with easily-marred surfaces, use the nose adapter. It is stored in the holder on the reverse side of the magazine.

Holder

4Nose adapter

Attach the nose adapter to the contact arm (see right). When not in use, store the nose adapter in the holder on the reverse side of the magazine to keep it from being lost.

Contact arm

6'

Nose adapter

Loading nailer

CAUTION:

Always lock the trigger and disconnect the hose before loading the nailer.

Select nails suitable for your work.

Insert strip of nails into the magazine.

Pull the pusher lever to the rear to engage the pusher to the last nail.

12

Image 12
Contents Pneumatic Framing Nailer AN922Safety Instructions Page Mended max. operating pressure AIR Gas Page Page Trigger Page Selecting compressor Selecting air hoseLubrication Nose adapter Loading nailerAdjusting depth of nailing Connecting air hoseUnloading nailer Operation Anti dry fire mechanismJammed nailer Nails Maintenance Maintenance of nailerMaintenance of compressor, air set and air hose Page Memo MAKmA Limitedone Year Warranty