*Never use the tool with other than compressed air. If bottled gas (carbon dioxide, oxgen, nitro- gen, hydrogen, air, etc.) or combustible gas (hydrogen, propane, acetylene, etc.) is used as a power source for this tool, the tool will explode and cause serious injury.
COMPRESSED
AIR
*Always check the tool for its overall condition and loose screws before operation. Tighten as required.
Make sure all safety systems are in working order before operation. The tool must not operate if only the trigger is pulled or if only the contact arm is pressed against the wood. It must work only when both actions are performed. Test for pos- sible faulty operation with nails unloaded and the pusher in fully pulled position.
c