*General Tool Handling Guidelines:
1.Always assume that the tool contains fasteners.
2.Do not point the tool toward yourself or anyone whether it contains fasteners or not.
3.Do not activate the tool unless the tool is placed firmly against the workpiece.
4.Respect the tool as a working implement.
5.No horseplay.
6.Do not hold or carry the tool with a finger on the trigger.
7.Do not load the tool with fasteners when any one of the operatingcontrols is activated.
8.Do not operate the tool with any _power source other than that specified in the tool operating/safety instructions.
*An improperly functioning tool must not be used. I
M
.Sparks sometimes fly when the tool is used. Do not use the tool near volatile, flammable materials such as gasoline, thinner, paint, gas, adhesives, etc.; they will ignite and explode, causing serious injury.
*The area should be sufficiently illuminated to assure safe operations.
The area should be clear and litter- free. Be especially careful to maintain good footing and balance.
III