Panasonic SC-PM38 Using the timer, Setting the clock, Using the play timer, Using the sleep timer

Using the timer

Setting the clock

This is a 24-hour clock.

1Press [CLOCK/TIMER] to select “CLOCK”. Each time you press the button:

CLOCK zPLAY

Original display

2Within 5 seconds, press [u/t] or [y/i] to set the time.

3Press [CLOCK/TIMER] again to confirm.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for a few seconds.

Note

The clock may lose or gain minutes over a period of time. Readjust as necessary.

Using the play timer PLAY

You can set the timer to come on at a certain time to wake you up.

Preparation

•Turn the unit on and set the clock.

•Prepare the music source (disc, radio, USB or iPod source) and set the volume.

1Press [CLOCK/TIMER] repeatedly to select play timer.

CLOCK zPLAY

Original display

2Within 5 seconds, press [u/t] or [y/i] to set the starting time.

To activate the timer

5Press [z, PLAY] to turn on play timer.

zPLAY No display (off)

6Press [^] to turn off the unit.

ToAction

change the	Repeat steps 1 to 4 and 6.
settings
change the	1)	Press [z, PLAY] to clear the timer
source or		indicator from the display.
volume	2)	Make changes to the source or
		volume.
	3)	Perform steps 5 and 6.
check the	Press [CLOCK/TIMER] repeatedly to
settings (when	select zPLAY.
the unit is on
or in standby
mode)
cancel	Press [z, PLAY] to clear the timer
	indicators from the display.

Note

•The play timer will start at the preset time, with the volume increasing gradually to the preset level.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [SLEEP] repeatedly to select your desired time.

ENGLISH

Start time

Play timer indicator

3Press [CLOCK/TIMER] to confirm.

4Repeat steps 2 and 3 to set the finishing time. Finish time

Sleep timer indicator

To cancel

Press [SLEEP] to select “OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.

Note

The play and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.

RQTX0215

11