SECTION 2: SETUP
UnpackingInventory
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately.
Needed for Setup
The following are needed to complete the setup process, but are not included with your machine.
Description |
| Qty | |
• | Cleaner/Degreaser (Page 9) | As Needed | |
• | Disposable Shop Rags | As Needed | |
• | sturdy Workbench | 1 | |
• sturdy Vise Secured to Workbench | ............ 1 | ||
• | standard Screwdriver #2 | 1 | |
• | hex Wrench 5mm | 1 | |
The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.
If any
Shipping Inventory: (Figure 1) | Qty | |
A. | Slip Roll Assembly | 1 |
B. | Crank Handle | 1 |
C. | Workpiece Support | 1 |
| A |
|
B
C
Figure 1. Model T10727 shipping inventory.
NOTICE
If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are