Set Up Safety Inventory, Unpacking

SECTION 2: SET UP

Set Up Safety		Inventory

This jig presents seri- ous injury hazards to untrained users. Read through this entire man- ual to become familiar with the controls and operations before using this jig!

Wear safety glasses dur- ing the entire set up pro- cess!

Unpacking

The Model H7583 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the con- dition of your shipment, you should inventory the contents.

H7583 Tenoning Jig

After all the parts have been removed from the two boxes, you should have the following items:

Box 1: (Figure 1)		Qty
A.	Work Plate Assembly and Base	................. 1
B.	Clamp Assembly	1
C.	Clamp Handle	1
D.	Clamp Arm	1
E.	Push Handles w/Flat Washer	2

	C
	B
	A
	D
	E
	Figure 1. Tenoning jig inventory.
Hardware and Tools		Qty
•	Lock Washer 10mm	2
•	Fender Washer 8mm	1
• Cap Screw M8-1.25 x 50mm		1
• Cap Screw M10-1.5 x 25mm		1
• Cap Screw M10-1.5 x 20mm		1
• Hex Wrenches 2.5, 3, 4, 6, 8mm		1 Ea

-7-

SECTION 2: SET UP

Set Up Safety

Inventory

Unpacking

Box 1: (Figure 1)

Qty

Work Plate Assembly and Base

Figure 1. Tenoning jig inventory.

Hardware and Tools

Qty