FenceBlades
When installing the fence, notice that the front edge of the table has two threaded holes. These holes accept the round spacers and socket head cap screws that attach the fence rail to the table.
1.Secure the fence rail to the table with the two socket head cap screws and spacers provided. Ensure that the slot in the rail lines up with the miter gauge slot in the table. See Figure 11.
Figure 11. Fence assembly schematic.
2.Mount the fence on the left side of the blade by setting the fence onto the table and rail.
3.Insert and tighten the fence locking knob to secure the fence at the desired distance from the blade.
A 1⁄2" blade is included with the bandsaw and is already installed on the machine. Refer to “Blade Tensioning” and “Blade Tracking” on pages 16 and 17 before starting the machine. Also, the Operations section contains instructions on selecting and changing blades.
This concludes the assembly process. Please DO NOT operate this saw until you have read this entire manual.
Do not operate this Bandsaw until you have completed the adjustments noted in the next section and have reviewed all safety information. Serious personal injury may result.
|
|
|
|
|
|
|
|
|
|
|
|
Model G1019Z 14" Bandsaw | |||