Grizzly Dust Collection Port, Attaching dust collection hose G5045 10 Bench Top Table Saw

Page 15

7.Using a straightedge as a guide, align the splitter with he saw blade. See Figure 12. Use care to ensure that alignment is exact. Failure to do so will result in difficulties when ripping or crosscutting.

Figure 12. Aligning the splitter with the blade.

8.Once the splitter is aligned, tighten all fas- teners securely.

9.Check splitter alignment after tightening.

Dust Collection Port

The Model G5045 10" Bench Top Table Saw is equipped with a dust which can be attached to standard 212" dust collection systems. To connect your table saw to a dust collection system:

1.Insert the end of a standard 212" flexible dust collection hose or shop vac hose into the dust port at the base of the table saw. See Figure 13.

2.Turn on the saw and the vacuum or dust collection system and begin operation.

Figure 13. Attaching dust collection hose.

 

 

 

 

 

 

 

 

 

 

 

 

G5045 10'' Bench Top Table Saw

-13-

Image 15
Contents Bench TOP 10 Table SAW Page Table Of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For Table Saws 110V Operation Grounding Circuit RequirementsCommentary General InformationClean up Site Considerations Unpacking Piece Inventory Assembly Stand AssemblyBench Mounting Page Rip Fence HandwheelsBlade Attachment Blade Guard/Splitter Attaching dust collection hose G5045 10 Bench Top Table Saw Dust Collection PortRip Fence Fence Tension AdjustmentsAligning miter gauge blade slot G5045 10 Bench Top Table Saw Miter GaugePositive Stops Check Table ParallelismFour hex head screws allow Blade adjustment Blade Selection OperationsTest Run Kickback CausesPage Cross-cutting lumber G5045 10 Bench Top Table Saw RippingCrosscuttingPush Paddles Safety AccessoriesPushsticks Table InsertsMaintenance General Unpainted SurfacesLubrication Closure Machine Data Sheet G5045 10 Bench Top Table Saw G5045 10 Bench Top Table Saw Stand LEG Base Saddle G5045 10 Bench Top Table Saw G5045 10 Bench Top Table Saw Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC