After First 50 Hours
After the first 50 working hours, or 30 days, whichever comes first, replace the oil in the motor with compressor oil (use ISO 100 or SAE 30W viscosity,
Also after this initial operation period, check to make sure that all the fittings are tight. Remove the air filter foam element and rinse it out in water. Allow it to dry and reinstall.
Blow out any accumulated dirt between the cylin- der cooling fins.
Every 300 Hours
After every 300 hours or 3 months of regular operation, perform the following maintenance items:
1.Change compressor motor oil.
2.Rinse the air filter foam element in water.
3.Check for air leaks and correct as needed.
4.Clean cylinder head fins for proper cooling.
5.Check for loose bolts or fittings.
Weekly
If the compressor is used on a regular daily basis, perform the following checks each week:
1.Rinse the air filter foam element in water.
2.Check for loose bolts or fittings.
The Model G8694/G8695/G8889 Air Compressors are specifically designed for air tool operation. DO NOT MODIFY AND/OR
USE THIS MACHINE FOR ANY OTHER PUR- POSE. Modifications or improper use of this tool will void the warranty. If you are con- fused about any aspect of this machine, DO NOT use it until you have answered all your questions. Serious personal injury may occur.
Like all power tools, there is danger asso- ciated with operating this equipment. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this tool with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
G8694/G8695/G8889 Air Compressors | |
|