Grizzly G0470 instruction manual Fixing Air Leaks, To find air leaks

Page 22

3.Inspect the O-ring and diaphragm (Figure 14) for damage and dirt.

Diaphragm

O-ring

Figure 14. Check valve diaphragm and

spring.

4.Replace any damaged parts and clean any dirt off of the diaphragm and O- ring.

5.Re-assemble the check valve. Make sure the diaphragm presses squarely against the air supply tube opening.

Fixing Air Leaks

Air leaks will cause low air output and increase the time the compressor must run.

To find air leaks:

1.Turn the compressor OFF when the tank is fully pressurized and unplug the compressor.

2.Listen for the sound of air to find fittings that may be leaking.

3.Spray the suspected air leak with a soap and water solution. If you see air bubbles, you have found your leak.

To fix air leaking around fitting threads:

1.Unplug the air compressor and drain all the air from the tank.

2.Unscrew the fitting that is leaking. Clean and wrap teflon tape and/or spread pipe dope on the threads.

3.Re-install the fitting to the compressor.

To fix air leaking through a valve:

1.Unplug the air compressor and drain all the air from the tank.

2.Remove the valve, clean it thoroughly, then re-install with teflon tape and/or pipe dope.

3.If the valve continues to leak, replace it with a new valve.

-20-

Model G0464/G0465/G0467/G0468/G0470 (Mfg. since 9/04)

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Air Compressor Page Table of Contents Introduction Foreword Contact InfoMachine Data Sheet Safety Mation about proper operation of the equipmentMake Workshop Child Proof Additional Safety Instructions For Air Compressors AIR Compressor StorageCircuit Requirements 110V OperationGrounding Unpacking SET UPAssembly To assemble the air compressorPlacement Operations Operation Safety StartingTo start the air compressor Line Pressure Regulation To control the air supply to your toolConnecting Tools To connect air tools to your air com- pressorWhen storing your air compressor, fol- low these guidelines StorageMaintenance ScheduleDraining Tank Pressure Safety ValveTo check the pressure safety valve To drain the tankTroubleshooting ServiceSymptom Possible Cause Possible Solution See Changing Oil Check ValveFixing Air Leaks To find air leaksPressure Switch Pressure adjustment screwsG0464 Parts Breakdown G0464 Parts List DescriptionG0465 Parts Breakdown G0465 Parts List G0467 Parts Breakdown G0467 Parts List DescriptionG0468 Parts Breakdown G0468 Parts List G0470 Parts Breakdown G0470 Parts List Warranty and Returns Warranty Card Place Stamp Here Name Street CityStateZip

G0470 specifications

The Grizzly G0470 is a powerful and versatile bandsaw that specializes in wood cutting and shaping, making it an essential tool for woodworkers and carpenters. This robust machine is designed for both hobbyists and professionals, offering an impressive blend of features, technologies, and characteristics that ensure optimal performance and durability.

One of the standout features of the Grizzly G0470 is its heavy-duty construction. The saw is built with a solid cast iron frame that provides stability and minimizes vibration during operation. This construction not only enhances the accuracy of cuts but also extends the lifespan of the machine. The saw's large table, measuring 20 inches by 27 inches, offers ample space for handling large workpieces, making it ideal for resawing thick lumber or creating intricate designs.

The Grizzly G0470 is powered by a robust 2 HP motor that delivers consistent performance and can handle a wide range of cutting tasks. The motor is also designed for durability and quiet operation, which is crucial for maintaining a comfortable working environment. With a variable speed drive, users can adjust the cutting speed according to the material being processed, ensuring smooth cuts whether working with hardwoods or softer materials.

Technologically, the G0470 is equipped with a precision-crafted blade that allows for clean and accurate cuts. The bandsaw accepts blades ranging from 1/4 inch to 3/4 inch in width, providing flexibility for different types of cutting applications. Additionally, the blade tensioning system is user-friendly, enabling quick adjustments to achieve the optimal tension for various cutting needs.

Another noteworthy characteristic of the Grizzly G0470 is its dust collection capability. The saw is designed with a dust port that can be connected to a dust collection system, helping to maintain a clean workspace while minimizing airborne particles. This feature not only promotes a healthier work environment but also extends the life of the machine by reducing sawdust accumulation.

Overall, the Grizzly G0470 is an exceptional bandsaw that combines heavy-duty construction, a powerful motor, variable speed options, and effective dust collection features. It is designed to meet the demands of both serious hobbyists and professional woodworkers, making it a valuable addition to any workshop. Its reliable performance and versatility make it an ideal choice for anyone looking to enhance their woodworking capabilities.
Top Page Image Contents